Last Updated by ISEnet on 2025-04-28
What is Jetting? Jetting for Modena KK1, KK1R, MKZ & KK2 is a mobile application that provides jetting recommendations for go-karts with Modena KK1, KK1R, MKZ and KK2 engines based on the current weather conditions and engine configuration. The app has four tabs: Results, Weather, Engine, and GPS. The Results tab shows the recommended jetting setup, including main jet, emulsion tube, needle type and clip position, inner pilot jet, and outer pilot jet. The Weather tab allows users to manually set the current temperature, pressure, altitude, and humidity or load the data from the nearest weather station. The Engine tab lets users set the engine and carburetor information, including engine model, float type and height, oil mix ratio, and circuit type. The GPS tab allows users to use GPS to get the current position and altitude and connect to an external service to get the weather conditions of the nearest weather station.
1. Jetting for Modena KK1, KK1R, MKZ & KK2 is an application which provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc.), a jetting recommendation for go-karts with Modena KK1, KK1R, MKZ and KK2 engines (ICC / KZ1 / KZ2 karting engines).
2. In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station.
3. - GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).
4. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
5. - Engine: you should set in this screen the information about the engine and the carburator (Dellorto VHSH 30), that is, the engine model (Modena KK1, KK1R, MKZ and KK2), the float type and height, the oil mix ratio and the type of the circuit (sprint or road racing, short or long).
6. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs.
7. The following carb values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet).
8. Nevertheless, the application can run without GPS and internet connection, in this case, the user must give the weather data.
9. - Weather: you can set the values for current temperature, pressure, altitude and humidity.
10. In addition, this tab lets do a fine tunning adjustment for the main (high) and needle (mid) circuits to adapt to the concrete engine.
11. The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
12. Liked Jetting? here are 5 Sports apps like Jetting Modena KZ1 / KZ2 Kart; Jetting Modena OK & OK-J Kart; Modena Volley; Jetting CR125 Shifter Kart; Jetting for KTM 2T Moto;
Or follow the guide below to use on PC:
Select Windows version:
Install Jetting for Modena KZ Kart app on your Windows in 4 steps below:
Download a Compatible APK for PC
| Download | Developer | Rating | Current version |
|---|---|---|---|
| Get APK for PC → | ISEnet | 1 | 1.4 |
Download on Android: Download Android
- Provides jetting recommendations for go-karts with Modena KK1, KK1R, MKZ and KK2 engines
- Calculates jetting recommendations based on current weather conditions and engine configuration
- Four tabs: Results, Weather, Engine, and GPS
- Results tab shows recommended jetting setup, including main jet, emulsion tube, needle type and clip position, inner pilot jet, and outer pilot jet
- Weather tab allows users to manually set the current temperature, pressure, altitude, and humidity or load the data from the nearest weather station
- Engine tab lets users set the engine and carburetor information, including engine model, float type and height, oil mix ratio, and circuit type
- GPS tab allows users to use GPS to get the current position and altitude and connect to an external service to get the weather conditions of the nearest weather station
- Works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.
PC Apps 
