Jetting Vortex KZ1 / KZ2 Kart for pc

Jetting Vortex KZ1 / KZ2 Kart for Pc

Published by Jet Lab, LLC on 2021-11-01

  • Category: Sports
  • License: $14.99
  • Current version: 2.3
  • File size: 44.69 MB
  • Compatibility: Windows 11/Windows 10

Download ⇩

★ ★ ★ Jetting Vortex KZ1 / KZ2 Kart Overview

       

What is Jetting Vortex KZ1 / KZ2 Kart?

This app is designed to provide 12 different jetting recommendations for Vortex RTZ, RSZ, RKZ, RVZ, RVXX, RVX, RVS engines that have DellOrto VHSH 30 carbs. It uses temperature, altitude, humidity, atmospheric pressure, and a given engine configuration to calculate the jetting setups. The app can obtain weather data automatically from the nearest weather station through the internet or manually entered by the user. The app also allows for fine-tuning adjustments for all the values for each jetting setup to adapt to the specific engine.



Software Features and Description

1. This app provides, using temperature, altitude, humidity, atmospheric pressure and a given engine configuration (engine model, floats, carb bore, emulsion tube type, floats, oil ratio, fuel type), 12 !!! jetting recommendations for Vortex RTZ, RSZ, RKZ, RVZ, RVXX, RVX, RVS engines that have DellOrto VHSH 30 carbs.

2. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and needle position, idle emulsifier (inner pilot jet) and idle jet (outer pilot jet), throttle valve, air screw position.

3. • Engine: You can configure in this screen the information about the engine, that is, engine model (RTZ, RSZ, RKZ, RVZ, RVXX, RVX, RVS), carburetor diameter, emulsion tube type, float type and height, fuel type, oil mix ratio and type of the circuit.

4. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE - relative horsepower, oxygen pressure and volumetric content of oxygen are shown too.

5. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet.

6. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station.

7. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs.

8. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.

9. • let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures.

10. This tab lets do a fine tuning adjustment for all this values for each jetting setup to adapt to the concrete engine.

11. Application can run without GPS, WiFi and internet, in this case user has to enter weather data manually.

12. Liked Jetting Vortex KZ1 / KZ2 Kart? here are 5 Sports apps like Jetting for Husqvarna 2T Moto; Jetting for TM Racing 2T Moto; Jetting IAME KZ1 / KZ2 Kart; Jetting Maxter KZ / ICC Kart;


Download and install Jetting Vortex KZ1 / KZ2 Kart on your computer


GET Compatible PC App


App Download Rating Maker
pc app Jetting Vortex KZ1 / KZ2 Kart Get App ↲ 11
4.64
Jet Lab, LLC

Or follow the guide below to use on PC:



Select Windows version:

  1. Windows 10
  2. Windows 11

Install Jetting Vortex KZ1 / KZ2 Kart app on your Windows in 4 steps below:


  1. Download an Android emulator for PC:
    Get either Bluestacks or the Nox App >> . We recommend Bluestacks because you can easily find solutions online if you run into problems while using it. Download Bluestacks PC software Here >> .

  2. Install the emulator:
    On your computer, goto the Downloads folder » click to install Bluestacks.exe or Nox.exe » Accept the License Agreements » Follow the on-screen prompts to complete installation.

  3. Using Jetting Vortex KZ1 / KZ2 Kart on PC [Windows 10/ 11]:
    • Open the Emulator app you installed » goto its search bar and search "Jetting Vortex KZ1 / KZ2 Kart"
    • The search will reveal the Jetting Vortex KZ1 / KZ2 Kart app icon. Open, then click "Install".
    • Once Jetting Vortex KZ1 / KZ2 Kart is downloaded inside the emulator, locate/click the "All apps" icon to access a page containing all your installed applications including Jetting Vortex KZ1 / KZ2 Kart.
    • Now enjoy Jetting Vortex KZ1 / KZ2 Kart on PC.

Download a Compatible APK for PC


Download Developer Rating Current version
Get APK for PC → Jet Lab, LLC 4.64 2.3


Download on Windows 11


For Windows 11, check if there's a native Jetting Vortex KZ1 / KZ2 Kart Windows app here » ». If none, follow the steps below:


  1. To get started, Download the OpenPC software »
    • Upon installation, open OpenPC app » goto "Playstore on PC" » click "Configure_Download" button. This will auto-download and install PlayStore on your computer.

  2. To use Jetting Vortex KZ1 / KZ2 Kart,
    • Login to the PlayStore we just installed
    • Search for "Jetting Vortex KZ1 / KZ2 Kart" » then Click "Install".
    • Jetting Vortex KZ1 / KZ2 Kart will now be available on your Windows start-menu.

Minimum requirements Recommended
  • 8GB RAM
  • SSD Storage
  • Processor: Intel Core i3, AMD Ryzen 3000
  • Architecture: x64 or ARM64
  • 16GB RAM
  • HDD Storage

Get Jetting Vortex KZ1 / KZ2 Kart on Apple macOS


Download Developer Reviews Rating
Get $14.99 on Mac Jet Lab, LLC 11 4.64

Download on Android: Download Android


Jetting Vortex KZ1 / KZ2 Kart functions

- 12 different jetting setups

- For each jetting setup, the following values are given: main jet, emulsion tube, needle type and position (including intermediate positions with washer), throttle valve, idle jet (outer pilot jet), idle emulsifier (inner pilot jet), air screw position

- Fine-tuning for all these values

- Create your carburetor and check the performance (over 90 needles available)

- History of all your jetting setups

- Graphic display of fuel mix quality (Air/Flow Ratio or Lambda)

- Support two idle emulsion tube types (DP or DQ)

- Selectable throttle valve size

- Selectable fuel type (gasoline with or without ethanol, Racing fuels available, for example: VP C12, VP 110, VP MRX02)

- Adjustable fuel/oil ratio

- Large selection of floats

- Adjustable floats height

- Mix wizard to get the perfect mix ratio (fuel calculator)

- Carburetor ice warning

- Possibility of using automatic weather data or a portable weather station

- Let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures

- Contains five tabs: Results, History, Compare, Engine, and Weather

- Results tab shows 12 different jetting setups, air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE - relative horsepower, oxygen pressure, and volumetric content of oxygen

- History tab contains the history of all jetting setups

- Compare tab allows comparing two carburetors

- Engine tab allows configuring the information about the engine

- Weather tab allows setting the values for current temperature, pressure, altitude, and humidity, and using GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station.




Top Pcmac Reviews

  • Very useful

    By Decker12345 (Pcmac user)

    Very useful and precise!!!

Similar Sports apps




More apps from the Developer