投稿者 Radius Networks
1. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.
2. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery.
3. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device.
4. Calibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging.
5. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon.
6. The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services.
7. Submit a valid PIN to update the settings for this beacon.
8. Submit a valid PIN to reset the settings for your beacon to factory defaults.
9. A beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again.
10. Update the measured power value with the results of your calibration activity and update your settings.
11. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service.
または、以下のガイドに従ってPCで使用します :
PCのバージョンを選択してください:
インストールして使用したい場合は RadBeacon あなたのPCまたはMac上のアプリをダウンロードするには、お使いのコンピュータ用のデスクトップアプリケーションエミュレータをダウンロードしてインストールする必要があります。 私たちはあなたの使い方を理解するのを助けるために尽力しました。 app を以下の4つの簡単なステップでコンピュータにインストールしてください:
OK。 最初のものが最初に。 お使いのコンピュータでアプリケーションを使用するには、まずMacストアまたはWindows AppStoreにアクセスし、Bluestacksアプリまたは Nox App Web上のチュートリアルのほとんどはBluestacksアプリを推奨しています。あなたのコンピュータでBluestacksアプリケーションの使用に問題がある場合は、簡単にソリューションをオンラインで見つける可能性が高くなるため、推奨するように誘惑されるかもしれません。 Bluestacks PcまたはMacソフトウェアは、 ここ でダウンロードできます。.
これで、インストールしたエミュレータアプリケーションを開き、検索バーを探します。 一度それを見つけたら、 RadBeacon を検索バーに入力し、[検索]を押します。 クリック RadBeaconアプリケーションアイコン。 のウィンドウ。 RadBeacon - Playストアまたはアプリストアのエミュレータアプリケーションにストアが表示されます。 Installボタンを押して、iPhoneまたはAndroidデバイスのように、アプリケーションのダウンロードが開始されます。 今私達はすべて終わった。
「すべてのアプリ」というアイコンが表示されます。
をクリックすると、インストールされているすべてのアプリケーションを含むページが表示されます。
あなたは アイコン。 それをクリックし、アプリケーションの使用を開始します。
PC用の互換性のあるAPKを取得
ダウンロード | 開発者 | 評価 | スコア | 現在のバージョン | 互換性 |
---|---|---|---|---|---|
APKを確認してください → | Radius Networks | 0 | 0 | 2.5.0 | 4+ |
ボーナス: ダウンロード RadBeacon iTunes上で
ダウンロード | 開発者 | 評価 | スコア | 現在のバージョン | アダルトランキング |
---|---|---|---|---|---|
無料 iTunes上で | Radius Networks | 0 | 0 | 2.5.0 | 4+ |
Windows 11でモバイルアプリを使用するには、AmazonAppstoreをインストールする必要があります。 設定が完了すると、厳選されたカタログからモバイルアプリを閲覧してインストールできるようになります。 Windows 11でAndroidアプリを実行したい場合は、このガイドが役立ちます。.
Google アプリ
Google Chrome - ウェブブラウザ
au Wi-Fiアクセス
かんたんnetprint-PDFも写真もコンビニですぐ印刷
セブン-イレブン マルチコピー
dアカウント設定/dアカウント認証をよりかんたんに
My SoftBank
Simeji - 日本語文字入力 きせかえキーボード
マイナポータル
PrintSmash
セブン−イレブン マルチコピー Wi-Fiアプリ
My docomo - 料金・通信量の確認
My au(マイエーユー)-料金・ギガ残量の確認アプリ
my 楽天モバイル
UQ mobile ポータル