Jetting for TM KZ / ICC Kart untuk PC: Unduh Gratis

★ ★ ★ Ulasan Kami

1. This app provides, using temperature, altitude, humidity, atmospheric pressure and a given engine configuration (engine model, floats, carb bore, emulsion tube type, floats, oil ratio, fuel type), jetting recommendations (12!!! carburetor configurations) for TM K9, K9B, K9C, KZ10, KZ10B, KZ10C, KZ-R1 engines that have DellOrto VHSH 30 carbs.

2. • Engine: You can configure in this screen the information about the engine, that is, engine model (K9, K9B, K9C, KZ10, KZ10B, KZ10C, KZ-R1), carburetor diameter, emulsion tube type, float type and height, fuel type, oil mix ratio and type of the circuit.

3. For each jetting setup, the following values are given: main jet, emulsion tube, needle type and needle position, idle emulsifier (inner pilot jet) and idle jet (outer pilot jet), throttle valve, air screw position.

4. Besides this jetting information, the air density, density altitude, relative air density, SAE - dyno correction factor, station pressure, SAE - relative horsepower, oxygen pressure and volumetric content of oxygen are shown too.

5. This app can obtain automatically the position and altitude to get the temperature, pressure and humidity from the nearest weather station thought internet.

6. Also this tab allows to use the GPS to get the current position and altitude, and connect to an external service (you can choose one weather data source from several possible) to get the weather conditions of the nearest weather station.

7. These data are calculated depending on the weather conditions and the engine and track configuration given in the next tabs.

8. • Weather: In this tab, you can set the values for current temperature, pressure, altitude and humidity.

9. • let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, liters, ml, gallons, oz for fuel, and mb, hPa, mmHg, inHg atm for pressures.

10. This tab lets do a fine tuning adjustment for all this values for each jetting setup to adapt to the concrete engine.

11. Application can run without GPS, WiFi and internet, in this case user has to enter weather data manually.

Tangkapan layar

Cara mengunduh dan menginstal Jetting for TM KZ / ICC Kart pada PC

Periksa Aplikasi atau Alternatif PC yang kompatibel

App	Unduh	Peringkat	Diterbitkan oleh
Jetting	Dapatkan Aplikasi atau Alternatif ↲	11 4.91	Jet Lab, LLC

Atau ikuti panduan di bawah ini untuk digunakan pada PC :

Pilih versi PC Anda:

Windows 10
Windows 11

Persyaratan Instalasi Perangkat Lunak:

Langkah 1: Unduh emulator Android untuk PC

Tersedia untuk diunduh langsung. Unduh di bawah:

Langkah 2: Instal emulator di PC

Langkah 3: Jetting for TM KZ / ICC Kart untuk PC - Windows 10/11

Sekarang, buka aplikasi Emulator yang telah Anda instal dan cari bilah pencariannya. Setelah Anda menemukannya, ketik Jetting for TM KZ / ICC Kart di bilah pencarian dan tekan Cari. Klik Jetting for TM KZ / ICC Kartikon aplikasi. Jendela Jetting for TM KZ / ICC Kart di Play Store atau toko aplikasi akan terbuka dan itu akan menampilkan Toko di aplikasi emulator Anda. Sekarang, tekan tombol Install dan seperti pada perangkat iPhone atau Android, aplikasi Anda akan mulai mengunduh. Sekarang kita semua sudah selesai.
Anda akan melihat ikon yang disebut "Semua Aplikasi".
Klik dan akan membawa Anda ke halaman yang berisi semua aplikasi yang Anda pasang.
Anda harus melihat ikon. Klik dan mulai gunakan aplikasi.

Dapatkan APK yang Kompatibel untuk PC