Jetting for Vortex KZ Kart 电脑版：免费下载用于PC

★ ★ ★ 发布者评论

1. Jetting for Vortex RVS, RVX, RVXX, RVZ, RKZ, RSZ, RTZ & VTZ is an application which provides, for the current weather conditions and a given engine configuration (engine model, carburetor, floats, track shape, etc.), a jetting recommendation for go-karts with Vortex RVS, RVX, RVXX, RVZ, RKZ, RSZ, RTZ and VTZ engines (ICC / KZ1 / KZ2 karting engines).

2. In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station.

3. - GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

4. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).

5. - Engine: you should set in this screen the information about the engine and the carburator (Dellorto VHSH 30 / PHBE 30), that is, the engine model (Vortex RVS, RVXX, RVX, RVZ, RKZ, RSZ, RTZ and VTZ), the float type and height, the oil mix ratio and the type of the circuit (sprint or road racing, short or long).

6. These data are calculated depending on the weather conditions and the engine and track configuration given in the following tabs.

7. The following carb values are given: main jet, emulsion tube, needle type and clip position, inner pilot jet (iddle diffuser) and outer pilot jet (iddle jet).

8. Nevertheless, the application can run without GPS and internet connection, in this case, the user must give the weather data.

9. - Weather: you can set the values for current temperature, pressure, altitude and humidity.

10. In addition, this tab lets do a fine tunning adjustment for the main (high) and needle (mid) circuits to adapt to the concrete engine.

11. The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.

截图

如何下载和安装 Jetting for Vortex KZ Kart 在你的PC和Mac上

检查兼容的 PC 应用程序或替代品

应用	下载	评分	开发人员
Jetting	获取应用程序或替代品 ↲	0 1	ISEnet

或按照以下指南在PC上使用 :

选择你的电脑版本:

Windows 10
Windows 11

软件安装要求:

步骤1：下载PC和Mac的Android模拟器

可直接下载。下载如下：

步骤2：在PC或Mac上安装模拟器

第3步： Jetting for Vortex KZ Kart 对于个人计算机 - Windows 7/8/8.1/10/11

现在，打开已安装的模拟器应用程序并查找其搜索栏。一旦找到它，请键入 Jetting for Vortex KZ Kart 在搜索栏并按搜索。点击 Jetting for Vortex KZ Kart应用程序图标。一个窗口 Jetting for Vortex KZ Kart 在Play商店或应用程序商店将打开并且它将在您的模拟器应用程序中显示商店。现在，按下安装按钮并像在iPhone或Android设备上一样，您的应用程序将开始下载。现在我们都完成了。
你会看到一个名为“所有应用程序”的图标。点击它，它会带你到一个包含所有已安装应用程序的页面。你应该看到图标。点击它并开始使用该应用程序。

获取适用于 PC 的兼容APK