Falco Flash BLE 4.0 for Pc

1. Assistance level can be increased by swapping the finger in the upward direction on the main screen (swap length should be more than 1 inch) once Hx motor is connected.

2. Connect and disconnect Falco Flash by using the single button on the main screen (White/blue round color button on the main screen-White for Start, Blue for Stop).

3. Emergency Stop can be activated by activating the Emergency Stop (Red Color) button on the main screen.

4. Emergency Stop button will set the motor power level to -3.

5. Do the same by swapping the finger downwards (swap length should be more than 1 inch) to decrease assistance level.

6. Screen allows Current clamp setting on different power level through Assist/Regen Mode.

7. Display speed in MPH or KPH, Battery Charge level (Minimum battery voltage should be 30V).

8. Total Duration of time for which Falco Flash has been connected to eDrive.

9. Torque sensor and individual power level adjustments are added.

10. after click on any one of them from list, we are connect to same falco eDrive.

11. Show list of all available Falco eDrives.

12. Liked Falco Flash BLE 4.0? here are 5 Health & Fitness apps like Tablet Packs - Safety App: Flashing lights, shapes and scrolling text.; Nuband Flash HR; Finder for Misfit Lite - find your Shine and Flash device; WW / WeightWatchers;