Jetting cho Pc

Jetting cho Pc

Được viết bởi ISEnet

  • Ngày phát hành: 2024-02-29
  • Danh mục: Sports
  • Tải về: $7.99
  • Phiên bản hiện tại: 2.2.1
  • Kích thước tệp: 2.90 MB
  • Khả năng tương thích: Windows 11/Windows 10/8/7/Vista

Tải về ⇩

★ ★ ★ Nhận xét của Biên tập viên

1. - Engine: you can set in this screen the information about your engine, carburator and track, that is, the engine type (Micromax, Minimax, Senior, Supermax, Junior or DD2), the model year of the engine, the spark plug brand used, the needle type, the float/pilot jet combo, the floats height, venturi, oil mix ratio, airbox type (new or old model) and the track type.

2. This app provides, using weather conditions and your engine configuration, a recommendation about jetting and spark plug to use for karts with Rotax Max EVO (Senior, Minimax, Micromax, Supermax, DD2 or Junior), which use a Dellorto VHSB 34 XS carb.

3. In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station.

4. - GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

5. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest public weather station (from the GPS tab).

6. This data are calculated depending on the weather conditions and the engine configuration given in the next tabs.

7. - Results: in this tab, the recommended main jet, needle position, air density and spark plug type values are shown.

8. Nevertheless, the application can run without GPS and internet connection, in this case, the user has to give the weather data.

9. - Weather: you can set the values for current temperature, altitude, pressure and humidity.

10. The application works with different measure units: inHg, mb, mmHg, hPa, atm for pressure, ºC and ºF for temperature.

11. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine.



Ảnh chụp màn hình

       


Cách tải xuống và cài đặt Jetting for Rotax Max EVO Kart trên máy tính xách tay hoặc máy tính để bàn


Kiểm tra Ứng dụng / Ứng dụng thay thế PC tương thích


Ứng dụng Tải về Xếp hạng Nhà phát triển
Jetting Tải ứng dụng ↲ 0
1
ISEnet

Hoặc làm theo hướng dẫn dưới đây để sử dụng trên PC :



messages.choose_pc:

  1. Windows 10
  2. Windows 11

Yêu cầu Cài đặt Phần mềm:

Bước 1: Tải xuống trình giả lập Android cho PC

Có sẵn để tải xuống trực tiếp. Tải xuống bên dưới:

  1. Nox »
  2. Bluestacks »

Bước 2: Cài đặt trình giả lập trên PC hoặc Mac


Bước 3: Jetting for Rotax Max EVO Kart cho PC - Windows 10 / 11

Bây giờ, mở ứng dụng Trình giả lập bạn đã cài đặt và tìm kiếm thanh tìm kiếm của nó. Một khi bạn tìm thấy nó, gõ Jetting for Rotax Max EVO Kart trong thanh tìm kiếm và nhấn Tìm kiếm. Bấm vào Jetting for Rotax Max EVO Kartbiểu tượng ứng dụng. Một cửa sổ Jetting for Rotax Max EVO Kart trên Cửa hàng Play hoặc cửa hàng ứng dụng sẽ mở và nó sẽ hiển thị Cửa hàng trong ứng dụng trình giả lập của bạn. Bây giờ nhấn nút Tải xuống và, như trên thiết bị iPhone hoặc Android của bạn, ứng dụng của bạn sẽ bắt đầu tải xuống. Bây giờ chúng ta đã xong.
Bạn sẽ thấy một biểu tượng có tên "Tất cả ứng dụng".
Click vào nó và nó sẽ đưa bạn đến một trang chứa tất cả các ứng dụng đã cài đặt của bạn.
Bạn sẽ thấy biểu tượng. Click vào nó và bắt đầu sử dụng ứng dụng.


Nhận APK tương thích cho PC


Tải về Nhà phát triển Xếp hạng Phiên bản hiện tại
Tải về APK dành cho PC » ISEnet 1 2.2.1


Tải về Jetting cho Mac OS (Apple)

Tải về Nhà phát triển Bài đánh giá Xếp hạng
$7.99 cho Mac OS ISEnet 0 1

Các ứng dụng khác của ISEnet





Ứng dụng tốt nhất - Sports