Roof Guide - Carpentry Calc PC 용

다운로드 Roof Guide - Carpentry Calc PC 용

에 의해 게시 Infoguide




에디터의 리뷰

1. In additions to the roof calculators the decking / flooring, stud wall and concrete calculators also estimate quantities and costs.

2. Roofing and framing carpentry calculator, decking, stairs, concrete, stud wall calculators.

3. Developed by a carpenter and builder, used by carpenters, roofers, contractors, builders and construction pro 's in over 30 countries around the world.

4. Permits Multiple restrictions on risers, treads, inclines and also allows application of 2R+G (2R+TD in US) in jurisdictions required - to meet standards.

5. Also calculations allow for situations where the overall stair rise and run are fixed or variable allowing maximum flexibility.

6. This app was created by a former Roof Framing Carpenter for our team of carpenters.

7. - Calculate (add, subtract etc) directly in feet / inches / fractions or decimals.

8. Other than StairCalc (which is our Stair only app) we do not know of an app that does this simultaneously.

9. - Calculate quantities for slabs, footings,round and rectangular/square holes.

10. Infoguide is part of a small building firm based in Western Australia.

11. - Work in Decimal units or Yds/Ft/In/Fraction format to Metric, decimal US.



스크린 샷

       


다운로드 및 설치 방법 Roof Guide - Carpentry Calc 귀하의 PC 및 Mac에서



Windows에서 사용할 수있는 앱과 같은 일부 앱! 아래에서 확인하십시오.

SN 다운로드 리뷰 개발자
1. Roof Jump Car Parking 다운로드 3.8/5
221 리뷰
3.8
Play With Games
2. Proof Text by Listening 다운로드 5/5
2 리뷰
5
sj34734

최상의 대안: 호환되는 PC 앱 또는 대안 확인


다운로드 평점 개발자
roof guide 앱 또는 대안 다운로드 0/5
0 리뷰
0
Infoguide

또는 아래 가이드를 따라 PC에서 사용하십시오. :

PC 버전 선택:

  1. Windows 7-10
  2. Windows 11

설치하고 사용하고 싶다면 Roof Guide - Carpentry Calc 앱을 PC 또는 Mac에 설치하려면 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야합니다. 우리는 당신이 어떻게 사용하는지 이해할 수 있도록 열심히 일했습니다 app 아래의 네 단계를 거쳐 귀하의 컴퓨터에서 사용할 수 있습니다 :


1 단계 : PC 및 Mac 용 Android 에뮬레이터 다운로드

확인. 먼저 첫 번째 것들. 컴퓨터에서 응용 프로그램을 사용하려면 먼저 Mac 저장소 또는 Windows 응용 프로그램 저장소를 방문하여 Bluestacks 응용 프로그램이나 Nox App 을 클릭하십시오. 웹에있는 대부분의 자습서는 Bluestacks 응용 프로그램을 권장하며 컴퓨터에서 Bluestacks 응용 프로그램을 사용하는 데 어려움이있을 경우 쉽게 온라인 솔루션을 쉽게 찾을 수 있기 때문에 Bluestacks 응용 프로그램을 권장합니다. Bluestacks Pc 또는 Mac 소프트웨어 여기 를 다운로드 할 수 있습니다.  


2 단계 : PC 또는 Mac에 에뮬레이터 설치


3 단계 : Roof Guide - Carpentry Calc PC의 경우 - Windows 7/8 / 10 / 11

설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 Roof Guide - Carpentry Calc 검색 막대에서 검색을 누릅니다. 클릭 Roof Guide - Carpentry Calc응용 프로그램 아이콘. 의 창 Roof Guide - Carpentry Calc Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.




PC 용 호환 APK 받기


다운로드 개발자 평점 점수 현재 버전 호환성
APK 확인 → Infoguide 0 0 5.46 4+
다운로드 Android


보너스 : 다운로드 Roof Guide iTunes에서

다운로드 개발자 평점 점수 현재 버전 성인 랭킹
무료 iTunes에서 Infoguide 0 0 5.46 4+


PC를 설정하고 Windows 11에서 Roof Guide 앱을 다운로드하는 단계:

Windows 11에서 모바일 앱을 사용하려면 Amazon Appstore를 설치해야 합니다. 설정이 완료되면 선별된 카탈로그에서 모바일 앱을 검색하고 설치할 수 있습니다. Windows 11에서 Android 앱을 실행하려는 경우 이 가이드가 적합합니다..


  1. 컴퓨터가 호환되는지 확인: 최소 요구 사항은 다음과 같습니다.
    • RAM: 8GB (최저한의), 16GB (추천)
    • 저장: SSD
    • Processor:
      • Intel Core i3 8th Gen (최소 이상)
      • AMD Ryzen 3000 (최소 이상)
      • Qualcomm Snapdragon 8c (최소 이상)
    • Processor Architecture: x64 or ARM64
  2. Roof Guide - Carpentry Calc 에 이미 기본 Windows 버전이 있는지 확인하십시오. 여기서 하세요 ». 기본 버전이 없으면 3단계로 진행합니다.
더 읽기 ❯


기능 및 설명

Roofing and framing carpentry calculator, decking, stairs, concrete, stud wall calculators. In additions to the roof calculators the decking / flooring, stud wall and concrete calculators also estimate quantities and costs. Metric or US / Imperial. Developed by a carpenter and builder, used by carpenters, roofers, contractors, builders and construction pro 's in over 30 countries around the world. Roof Guide (previously Roofers Guide) is not a 'How to App’ - you know how! It is designed to save you the time and effort required for roof, framing, deck, stairs & other building / construction calculations Accurate, reliable and easy to use, it is an indispensable tool for the construction pro. Metric or Imperial (feet, inches and fractions of an inch (or decimal) Print, email or reports. Never forget your span or rafter tables, red roofing book and other standalone construction calculators again! CALCULATIONS INCLUDE: ROOF FRAMING:- - Rafter,Hip/Valley Lengths - Multiple cut angles, including for compound saw - Template (adjustable) sizes for the same cuts - where used - Setout of Creepers/Jack Rafters(US), ridge and wall - Roof Pitch Factor degrees, inches (US), D:M:S - Rise : Run ratio - Birdsmouth calculations - Drop or Chamfer Hip adjustments - Multiple heights measures, including:- top/bottom of ridge, roof centre, - Hypotenuse calculations eg: Calculate Pitch from ridge rise - Adjust pitching plate heights where one wall is higher eg Bulkheads - Ridge length, area, rake factors - Print, email or message reports DECKING & FLOORING SETOUT, MATERIAL ESTIMATING and COSTING:- - Options for Insets, single or double bearers - Set Spacing type to maximum, fixed or equal - Set pricing for materials / labour to calculate cost and cost/area TIMBER SETOUT:- - Set Spacing type to maximum, fixed or equal - Insets at start and end. STUD WALLS SETOUT, MATERIAL ESTIMATING and COSTING:- - Raked or flat walls - Sizing, Quantity & Cost Estimates - Timber (studs, noggins, plates) & Sheeting - Comprehensive setout lists - bottom, top - Align sheets on width, length or no sheets STAIR FRAMING (currently for single stair runs):- Permits Multiple restrictions on risers, treads, inclines and also allows application of 2R+G (2R+TD in US) in jurisdictions required - to meet standards. Other than StairCalc (which is our Stair only app) we do not know of an app that does this simultaneously. Also calculations allow for situations where the overall stair rise and run are fixed or variable allowing maximum flexibility. - Number and size of step risers, treads, step inclines, - Step incline (Also changeable), - Stairwell opening, - Stringer Lengths CONCRETE CALCULATOR / ESTIMATOR:- - Calculate quantities for slabs, footings,round and rectangular/square holes. - Estimates total volume and cost allowing for waste. CONVERTER:- - Convert Lengths, Area, Volume: Metric and US/Imperial. - Work in Decimal units or Yds/Ft/In/Fraction format to Metric, decimal US. EASY TO USE GENERAL CALCULATOR WITH TAPE: - Calculate (add, subtract etc) directly in feet / inches / fractions or decimals. - Common functions for quick calculation EXTENSIVE HELP: Extensive help - Tap twice on most buttons for more info. Optimised for all iPhones and iPads using IOS17+ in portrait mode. INFOGUIDE: Infoguide is part of a small building firm based in Western Australia. This app was created by a former Roof Framing Carpenter for our team of carpenters. We use it and believe it will be as helpful to other carpenters as it was for us. Terms of Service: http://www.apple.com/legal/itunes/appstore/dev/stdeula



추가 응용 프로그램 Infoguide





최고의 앱 - Utilities