Speedometer, Speed Limit Alert PC 용

다운로드 Speedometer, Speed Limit Alert PC 용

에 의해 게시 Dmitriy Kharutskiy


평점:

5.0/5
5
보낸 사람 1 평점


에디터의 리뷰

1. Why use the GPS G-meter: no need to keep your iPhone in a fixed position or connect it to your vehicle’s computer system, which means speed readings can be taken discreetly, for example, during a test drive.

2. To do this, create a route, using a special online service (such as GPX Editor - The online GPX file editor - Track drawing websites - ) on your desktop, and export it as a GPX (KML, CSV) file.

3. • Type in any word without numbers (for example, "OFF") and use if to turn off the speed control.

4. 60!!": Continuous signal within the speed range between 50 and 55, and continuous signal for over 60.

5. Get APPROXIMATE acceleration calculated based on your speed variation.

6. The file name must begin with "Route".

7. Using iTunes, transfer the file into the app (OR use the "Files" app).

8. • "60! 70!! 80!!!": One audio signal once you go over 60, a continuous signal for over 70, and another continuous (and more unpleasant) signal for over 80.

9. Following this, you will be able to select your route at the bottom of your track list.

10. Acceleration cannot be measured near tall buildings, in the mountains or woods.

11. Load and show your route (journey plan) on the map together with a track.



스크린 샷

       


다운로드 및 설치 방법 Speedometer, Speed Limit Alert 귀하의 PC 및 Mac에서



Windows에서 사용할 수있는 앱과 같은 일부 앱! 아래에서 확인하십시오.

SN 다운로드 리뷰 개발자
1. Speedometer for AutoBike Voyage 다운로드 5/5
0 리뷰
5
Shipwreck Software

최상의 대안: 호환되는 PC 앱 또는 대안 확인


다운로드 평점 개발자
speedometer speed limit alert 앱 또는 대안 다운로드 5/5
1 리뷰
5
Dmitriy Kharutskiy

또는 아래 가이드를 따라 PC에서 사용하십시오. :

PC 버전 선택:

  1. Windows 7-10
  2. Windows 11

설치하고 사용하고 싶다면 Speedometer, Speed Limit Alert 앱을 PC 또는 Mac에 설치하려면 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야합니다. 우리는 당신이 어떻게 사용하는지 이해할 수 있도록 열심히 일했습니다 app 아래의 네 단계를 거쳐 귀하의 컴퓨터에서 사용할 수 있습니다 :


1 단계 : PC 및 Mac 용 Android 에뮬레이터 다운로드

확인. 먼저 첫 번째 것들. 컴퓨터에서 응용 프로그램을 사용하려면 먼저 Mac 저장소 또는 Windows 응용 프로그램 저장소를 방문하여 Bluestacks 응용 프로그램이나 Nox App 을 클릭하십시오. 웹에있는 대부분의 자습서는 Bluestacks 응용 프로그램을 권장하며 컴퓨터에서 Bluestacks 응용 프로그램을 사용하는 데 어려움이있을 경우 쉽게 온라인 솔루션을 쉽게 찾을 수 있기 때문에 Bluestacks 응용 프로그램을 권장합니다. Bluestacks Pc 또는 Mac 소프트웨어 여기 를 다운로드 할 수 있습니다.  


2 단계 : PC 또는 Mac에 에뮬레이터 설치


3 단계 : Speedometer, Speed Limit Alert PC의 경우 - Windows 7/8 / 10 / 11

설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 Speedometer, Speed Limit Alert 검색 막대에서 검색을 누릅니다. 클릭 Speedometer, Speed Limit Alert응용 프로그램 아이콘. 의 창 Speedometer, Speed Limit Alert Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.




PC 용 호환 APK 받기


다운로드 개발자 평점 점수 현재 버전 호환성
APK 확인 → Dmitriy Kharutskiy 1 5 2.11.1 4+
다운로드 Android


보너스 : 다운로드 Speedometer, Speed Limit Alert iTunes에서

다운로드 개발자 평점 점수 현재 버전 성인 랭킹
무료 iTunes에서 Dmitriy Kharutskiy 1 5 2.11.1 4+


PC를 설정하고 Windows 11에서 Speedometer, Speed Limit Alert 앱을 다운로드하는 단계:

Windows 11에서 모바일 앱을 사용하려면 Amazon Appstore를 설치해야 합니다. 설정이 완료되면 선별된 카탈로그에서 모바일 앱을 검색하고 설치할 수 있습니다. Windows 11에서 Android 앱을 실행하려는 경우 이 가이드가 적합합니다..


  1. 컴퓨터가 호환되는지 확인: 최소 요구 사항은 다음과 같습니다.
    • RAM: 8GB (최저한의), 16GB (추천)
    • 저장: SSD
    • Processor:
      • Intel Core i3 8th Gen (최소 이상)
      • AMD Ryzen 3000 (최소 이상)
      • Qualcomm Snapdragon 8c (최소 이상)
    • Processor Architecture: x64 or ARM64
  2. Speedometer, Speed Limit Alert 에 이미 기본 Windows 버전이 있는지 확인하십시오. 여기서 하세요 ». 기본 버전이 없으면 3단계로 진행합니다.
더 읽기 ❯


기능 및 설명

1. Step-by-step audio notifications once you have reached your required speeds. 2. Speed data filtering. Readings with the filter on are more inert than those with the filter off though. THE FILTER MUST BE ON WHEN CYCLING, JOGGING OR WALKING. 3. The G-meter. Get APPROXIMATE acceleration calculated based on your speed variation. Why use the GPS G-meter: no need to keep your iPhone in a fixed position or connect it to your vehicle’s computer system, which means speed readings can be taken discreetly, for example, during a test drive. Taking a number of readings compensates lesser accuracy. Acceleration is calculated only when the filter is off. Acceleration cannot be measured near tall buildings, in the mountains or woods. 4. Large, well-lit digits 5. HUD (the speed is displayed in the windscreen reflection at night time or in cloudy weather) 6. Background mode. Continued use of GPS running in the background can dramatically decrease battery life. 7. Speed and acceleration graphs 8. Odometer 9. Altimeter 10. Time, journey duration, and current stop duration. The current stop duration will be reset after 20 seconds of motion. 11. See tracks on the map 12. Save tracks 13. Compass 14. Angle of incline (inclinometer) 15. Aircraft descent/climb angle 16. Get detailed stats for any part of your journey 17. Export your journey to a KMZ or GPX file 18. Export track statistics table to a CSV file 19. Load and show your route (journey plan) on the map together with a track. To do this, create a route, using a special online service (such as GPX Editor - https://www.gpxeditor.co.uk/map, The online GPX file editor - https://gpx.studio/, Track drawing websites - https://wiki.openstreetmap.org/wiki/Track_drawing_websites) on your desktop, and export it as a GPX (KML, CSV) file. The file name must begin with "Route". Using iTunes, transfer the file into the app (OR use the "Files" app). Following this, you will be able to select your route at the bottom of your track list. Now you can easily travel following your route line, even without loading a map. 20. Export and import files via iTunes and email 21. Waypoints (description, color selection, keywords, photos, audio records) 22. A single waypoint database with a filter option 23. Music controls Audio alert settings: • "60! 70!! 80!!!": One audio signal once you go over 60, a continuous signal for over 70, and another continuous (and more unpleasant) signal for over 80. • "60! 70": Detailed cues, such as "60! 70!!". • "50!! 55. 60!!": Continuous signal within the speed range between 50 and 55, and continuous signal for over 60. • "60!!! 60.": One signal above 60. • You can enter a comment at the beginning of the line, for example, "Highway 70!!!". • Type in any word without numbers (for example, "OFF") and use if to turn off the speed control. • You can upload your own WAV file with the name of the signal (for example, "!.wav" or "!!!.wav") to play your own sound. Connect your iPhone to a computer, then go to iTunes > iPhone > "File Sharing" > Apps. Or use the "Files" app. You will need to restart the app. IMPORTANT! 1. When driving past tall buildings (or in the mountains or woods) with the filter off, the device may display false speed spikes (due to an unstable satellite signal). In this case, switching the filter on may be a better option. 2. Car speedometers often display a higher than actual speed, the difference sometimes reaching 10%. This is due to your wheels’ diameter. This is why at high speeds GPS speedometers can deliver better accuracy than your regular car speedometer. And the higher the speed, the more accurate your GPS speedometer is. 3. Please note that temporary false readings are possible with ANY GPS speedometer when you start using it. 4. Battery life (iPhone 5S, poor light outside, 100% => 20%): Background mode (iPhone asleep): ~ 9 h Speedometer (speed, distance): ~ 4 h Track-enabled map: ~ 2 h 30 min https://youtu.be/92TefSsz7gY



추가 응용 프로그램 Dmitriy Kharutskiy





최고의 앱 - Navigation