Jetting PC 용

다운로드 Jetting PC 용

에 의해 게시 에 의해 게시 ISEnet

  • 출시일: 2023-08-17
  • 카테고리: Sports
  • 다운로드: $3.99
  • 현재 버전: 1.12
  • 파일 크기: 4.01 MB
  • 호환성: Windows 11/Windows 10/8/7/Vista

다운로드 ⇩
평점:

4.0/5
4
보낸 사람 1 평점

★ ★ ★ 에디터의 리뷰

1. In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station.

2. - GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

3. This app provides, using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, a recommendation about the jetting configuration to use for KTM 2-strokes MX and enduro bikes (SX, SXS, EXC, XC and MXC models).

4. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).

5. These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs.

6. - Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown (screw position is expressed in turns from fully tightened).

7. - Weather: you can set the values for current temperature, pressure, altitude and humidity.

8. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data.

9. - Engine: you can set in this screen the information about the engine, that is, the model year, model and carburetor, and the oil mix ratio that you\'re using.

10. The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures.

11. In addition, this tab lets do a fine tuning adjustment to adapt to a concrete engine (you know that each engine has its own personality).



스크린 샷

       


다운로드 및 설치 방법 Jetting for KTM 2T Dirt Bikes 귀하의 PC 및 Mac에서


호환되는 PC 앱 또는 대안 확인


다운로드 평점 개발자
Jetting 앱 또는 대안 다운로드 ↲ 1
4.00
ISEnet

또는 아래 가이드를 따라 PC에서 사용하십시오. :



PC 버전 선택:

  1. Windows 10
  2. Windows 11

소프트웨어 설치 요구 사항:

1 단계 : PC 및 Mac 용 Android 에뮬레이터 다운로드

직접 다운로드 가능합니다. 아래 다운로드 :

  1. Nox »
  2. Bluestacks »

2 단계 : PC 또는 Mac에 에뮬레이터 설치


3 단계 : Jetting for KTM 2T Dirt Bikes PC의 경우 - Windows 7/8 / 10 / 11

설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 Jetting for KTM 2T Dirt Bikes 검색 막대에서 검색을 누릅니다. 클릭 Jetting for KTM 2T Dirt Bikes응용 프로그램 아이콘. 의 창 Jetting for KTM 2T Dirt Bikes Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.


PC 용 호환 APK 받기


다운로드 개발자 평점 현재 버전
다운로드 PC 용 APK » ISEnet 4.00 1.12


다운로드 Jetting Mac OS의 경우 (Apple)

다운로드 개발자 리뷰 평점
$3.99 Mac OS의 경우 ISEnet 1 4.00

기능 및 설명

This app provides, using temperature, altitude, humidity, atmospheric pressure and oil-mix ratio, a recommendation about the jetting configuration to use for KTM 2-strokes MX and enduro bikes (SX, SXS, EXC, XC and MXC models). In order to get the weather values, the application can use the location service (GPS or WiFi) to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS, WiFi and internet connection, in this case, the user has to give the weather data. The application is made up of four tabs that are described next: - Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown (screw position is expressed in turns from fully tightened). These data are calculated depending on the weather conditions and the engine configuration introduced in the next tabs. Under the recommended main jet, the calculated real value with decimals is shown. The air density and density altitude are shown too. In addition, this tab lets do a fine tuning adjustment to adapt to a concrete engine (you know that each engine has its own personality). - Weather: you can set the values for current temperature, pressure, altitude and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab). - Engine: you can set in this screen the information about the engine, that is, the model year, model and carburetor, and the oil mix ratio that you\'re using. - GPS: This tab allows to use the location service (using GPS or WiFi) to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity). The app let you use different measure units: ºC y ºF for temperatures, meter and feet for altitude, and mb, hPa, mmHg, inHg y atm for pressures. Valid for the following models from 2005 to 2024: - 50 SX: 2005-2024. - 50 SX Factory Edition: 2021-2024. - 50 SX Mini: 2017-2024. - 65 SX: 2017-2024. - 85 SX: 2005-2024. - 105 SX: 2006-2012. - 125 SX: 2005-2022. - 125 SXS: 2005-2007. - 125 EXC: 2005-2016. - 125 XC: 2017-2018. - 144 SX: 2007-2008. - 150 SX: 2009-2022. - 150 XC: 2010, 2012, 2013, 2014, 2017, 2018, 2019. - 200 EXC: 2005-2016. - 200 XC: 2005-2012. - 250 SX: 2005-2022. - 250 SXS: 2005-2007. - 250 XC: 2007-2019. - 250 EXC: 2005-2018. - 300 EXC: 2005-2018. - 300 XC: 2009-2018. - 300 MXC: 2005. * Please note that the application is valid only for engines that use carburetor. Not valid for fue injection engines.



추가 응용 프로그램 ISEnet





최고의 앱 - Sports