에 의해 게시 에 의해 게시 Andrew Smith
1. When you use Transfer Function with a two-channel audio interface to run, such as the Studio Six Digital iAudioInterface2, then you can also use any audio source as the test signal, including music.
2. However, you can use our Transfer Funciton with the internal iOS microphone, if you can send the pink noise generator output to the sound system input.
3. Transfer Function is a dual-FFT acoustic analysis app that is used for sound system audio analysis.
4. Normally a transfer function requires a two-channel interface, and that is true with this one, also, if you want to use it with program material (music).
5. Since it can operate with music as the signal source, it can be used during a musical performance to monitor and turn the system equalization during the show.
6. In this configuration, the internal generator is routed back to the input as the reference channel.
7. You can measure delay, magnitude, and phase using this setup.
또는 아래 가이드를 따라 PC에서 사용하십시오. :
PC 버전 선택:
소프트웨어 설치 요구 사항:
직접 다운로드 가능합니다. 아래 다운로드 :
설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 Transfer Function 검색 막대에서 검색을 누릅니다. 클릭 Transfer Function응용 프로그램 아이콘. 의 창 Transfer Function Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.
다운로드 Transfer Function Mac OS의 경우 (Apple)
| 다운로드 | 개발자 | 리뷰 | 평점 |
|---|---|---|---|
| $49.99 Mac OS의 경우 | Andrew Smith | 1 | 5.00 |
PC를 설정하고 Windows 11에서 Transfer Function 앱을 다운로드하는 단계:
Transfer Function is a dual-FFT acoustic analysis app that is used for sound system audio analysis. Since it can operate with music as the signal source, it can be used during a musical performance to monitor and turn the system equalization during the show. Transfer function includes: -- Magnitude Graph -- Phase Graph -- Coherence Plot -- Delay Finder -- Signal Generator Normally a transfer function requires a two-channel interface, and that is true with this one, also, if you want to use it with program material (music). However, you can use our Transfer Funciton with the internal iOS microphone, if you can send the pink noise generator output to the sound system input. In this configuration, the internal generator is routed back to the input as the reference channel. You can measure delay, magnitude, and phase using this setup. When you use Transfer Function with a two-channel audio interface to run, such as the Studio Six Digital iAudioInterface2, then you can also use any audio source as the test signal, including music. See our website for more information.
PcMac 한국어 
