에 의해 게시 TTrGames
1. Just plug any compatible USB analog-to-digital converter to Your iPhone, iPad or iPod Touch* using the Camera Connection Kit and use its stereo inputs (left and right) as two independent mono inputs and mix two instruments with line level output** into a stereo signal with level control and stereo panning.
2. ** To use external microphones or guitars You should use a DA Converter which accepts microphone level input or use a separate preamplifier to get line level signals.
3. On older devices such as iPhone 4 where the Camera Connection Kit is not supported only the microphone input will work, thus You can use DMIMixer with limited functionality.
4. Use Your stereo USB AD Converter as a dual mono input and mix the two inputs in stereo.
5. DMIMixer also works with the built-in or plugged-in microphone but in that case both input channels will use the same mono input.
6. DMIMixer supports Audiobus so You can filter or record Your instruments using Your favourite Audiobus enabled apps.
7. In this case You can still pan, amplify and monitor the input signal.
8. * Compatible with iPad2, iPhone4, iPod Touch 4th gen or newer.
9. Requires iOS 7 or newer.
또는 아래 가이드를 따라 PC에서 사용하십시오. :
PC 버전 선택:
소프트웨어 설치 요구 사항:
직접 다운로드 가능합니다. 아래 다운로드 :
설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 DMIMixer 검색 막대에서 검색을 누릅니다. 클릭 DMIMixer응용 프로그램 아이콘. 의 창 DMIMixer Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.
다운로드 DMIMixer Mac OS의 경우 (Apple)
| 다운로드 | 개발자 | 리뷰 | 평점 |
|---|---|---|---|
| $1.99 Mac OS의 경우 | TTrGames | 3 | 5.00 |
PC를 설정하고 Windows 11에서 DMIMixer 앱을 다운로드하는 단계:
Use Your stereo USB AD Converter as a dual mono input and mix the two inputs in stereo. Just plug any compatible USB analog-to-digital converter to Your iPhone, iPad or iPod Touch* using the Camera Connection Kit and use its stereo inputs (left and right) as two independent mono inputs and mix two instruments with line level output** into a stereo signal with level control and stereo panning. DMIMixer also works with the built-in or plugged-in microphone but in that case both input channels will use the same mono input. In this case You can still pan, amplify and monitor the input signal. DMIMixer supports Audiobus so You can filter or record Your instruments using Your favourite Audiobus enabled apps. Features: - Set level and pan for each input channel independently - Set level of the overall stereo mix - Level can be varied between -INF to +12dB - Double-tap on any knob to set to default value - See the incoming or the outgoing audio signals on the built-in oscilloscopes - Monitor the incoming or outgoing audio signal levels on the built-in VU meters - Set the levels to clipping volumes go or beyond to achieve distortion - Use DMIMixer standalone or as an input device in Audiobus Check the demo made by thesoundtestroom at http://youtu.be/muqOJpT8xJ8 Check the introduction video at http://youtu.be/2GFshc6hWq8 and the features at http://youtu.be/bukGGS1u0O0 * Compatible with iPad2, iPhone4, iPod Touch 4th gen or newer. Requires iOS 7 or newer. On older devices such as iPhone 4 where the Camera Connection Kit is not supported only the microphone input will work, thus You can use DMIMixer with limited functionality. ** To use external microphones or guitars You should use a DA Converter which accepts microphone level input or use a separate preamplifier to get line level signals.
PcMac 한국어 
