다운로드 DCircuit Lab HD PC 용

PC를 설정하고 Windows 11에서 DCircuit Lab HD 앱을 다운로드하는 단계:

1. 컴퓨터가 호환되는지 확인: 최소 요구 사항은 다음과 같습니다.
• RAM: 8GB (최저한의), 16GB (추천)
• 저장: SSD
• Processor:
• Intel Core i3 8th Gen (최소 이상)
• AMD Ryzen 3000 (최소 이상)
• Qualcomm Snapdragon 8c (최소 이상)
• Processor Architecture: x64 or ARM64
2. DCircuit Lab HD 에 이미 기본 Windows 버전이 있는지 확인하십시오. 여기서 하세요 ». 기본 버전이 없으면 3단계로 진행합니다.

DCircuit Lab HD is a tool for simulating combinatorial and sequential digital circuits. Circuits can be simulated in two ways: 1) one single step: all the outputs values are evaluated at the same time. 2) step by step: outputs and gates are evaluated one step a time. This shows how each gate's output changes and how changes propagate through the circuit. This feature is very useful to understand complex circuits behavior. At the end of each simulation step, each gate may have a different color: ￭ black: gate's output unchanged during the just ended simulation step ￭ dark green: gate's output evaluated during the just ended simulation step ￭ light green: gate's output evaluated during the just ended simulation step, gate needs to be evaluated again during the next simulation step ￭ blue: gate needs to be evaluated during the next simulation step At the end of the simulation, each wire's color corresponds to the digital value carried on itself: red for 1 and gray for 0. If circuit contains clock inputs, it's simulation is dynamic. This means that outputs change accordingly to the clocks. During this dynamic simulation, user can change inputs values to study the circuit behavior. Once the simulation is stopped, a circuit timing chart is available. Circuits are built using basic components, gates and flip-flops: ￭ input pins ￭ output pins ￭ clock ￭ wires ￭ 2 inputs and 3 inputs AND gates ￭ 2 inputs and 3 inputs NAND gates ￭ 2 inputs OR gates ￭ 2 inputs NOR gates ￭ 2 inputs XOR gates ￭ NOT gates ￭ Flip-flop RS, JK, T, D ￭ Multiplexer (4 outputs) ￭ Demultiplexer (4 inputs) Circuits may be controlled by means of the following gesture: ￭ Drag: to move the circuit into the desired position ￭ Tap on a gate: to modify the gate ￭ Double Tap on a gate: to modify the gate ￭ Double Tap on a input pin: change its value from 1 to 0 or from 1 to 0 ￭ Pinch: to zoom in and out ￭ Double finger double Tap: to reset position and zoom level to the original values Circuits may be easily stored and reused. Some video tutorials are available to learn using the application. Visit the site to see the tutorials.