다운로드 TouchCab PC 용

PC를 설정하고 Windows 11에서 TouchCab 앱을 다운로드하는 단계:

1. 컴퓨터가 호환되는지 확인: 최소 요구 사항은 다음과 같습니다.
• RAM: 8GB (최저한의), 16GB (추천)
• 저장: SSD
• Processor:
• Intel Core i3 8th Gen (최소 이상)
• AMD Ryzen 3000 (최소 이상)
• Qualcomm Snapdragon 8c (최소 이상)
• Processor Architecture: x64 or ARM64
2. TouchCab 에 이미 기본 Windows 버전이 있는지 확인하십시오. 여기서 하세요 ». 기본 버전이 없으면 3단계로 진행합니다.

You have a model railroad. You have an ECoS or ECoS2 digital command station from ESU, a Central Station from Märklin or a Lenz v3.6 command station. You also have an iPhone or an iPod touch from Apple and a wireless network connected to the command station. Would you like to run your model railroad from the iPhone or iPod? You can - with TouchCab. So what is TouchCab? TouchCab is a handheld controller for your DCC (Digital Command Control) model railroad / railway / train set. With TouchCab you can follow your trains around your layout without having to worry about plugging and unplugging a wired device. You can throw switches/turnouts and set train routes as you move along. Features: - Control all the locomotives defined in the command station. - Access up to 29 functions of each locomotive. - Clear overview of the locomotive’s speed and state. - Easily change the throttle from left- to right handed operation. - Wireless network connection to the command station. - Control all switches/turnouts and signals defined in the command station. - Locomotives and accessories are listed alphabetically, regardless of their order in the command station lists. Supported DCC command stations: ECoS 50000 by ESU (v1.1.3 or higher) ECoS 2 50200 by ESU (v3.2.0 or higher) Central Station 60212 by Märklin (v2.0.4 or higher) Lenz 23151 XpressNet Interface with Lenz v3.6 command stations LZV100 or LZ100 Requirements: -Digital Model Railway with a compatible DCC Command Station - Network connection to the command station - Wireless connection to the iPhone or iPod Touch Instructions: - Tap the speed wedge in either side to speed up and slow down your trains - Change speed gradually by dragging across the speed wedge - Double-tap the halt button to halt all trains. - Swipe the function buttons sideways to access locomotive functions above F7 - Switch between left and right hand operation from the options tab - Control routes and turnouts from the turnouts tab - Control signals and other accessories from the signals tab Want to try before your buy? Try TouchCab Free - a feature limited free version that is built on the same code base as TouchCab.