에 의해 게시 Cem Olcay
1. If you enable the lock mode from the settings strip on the bottom of the app, you may adjust each visible step fader on the screen by a single swipe gesture without having to lift your finger up.
2. And don't forget to route StepBud's MIDI out to the app or audio unit you want to sequence.
3. You need to route its MIDI out port in the settings menu to the audio app you want to sequence.
4. If you want to go off-scale or try some crazy chords on some of your steps, or maybe on all of them, you can go to the Step Editor by double tapping the LED of the step you want to edit.
5. Don't forget to enable MIDI in port of your MIDI keyboard or the you want to receive MIDI from the settings menu.
6. In StepBud's powerful Step Editor, you can set your step's notes either from the virtual keyboard or your connected MIDI keyboard.
7. StepBud is a MIDI Sequencer with Audio Unit AUv3 plugin, Audiobus and Ableton Link.
8. Please note that you need to have an iOS 11+ device and an Audio Unit host application such as AUM, apeMatrix, Cubasis, BeatMaker or Audiobus in order to use the StepBud as an Audio Unit plugin.
9. - Send unlimited custom MIDI CC messages if you want to control your hardware or software synth parameters.
10. - Lock steps if you don't want them to change their value.
11. You may also preview the selected notes by pressing the preview button in Step Editor for making sure you created the perfect sound for your particular step.
또는 아래 가이드를 따라 PC에서 사용하십시오. :
PC 버전 선택:
설치하고 사용하고 싶다면 StepBud - AUv3 MIDI Sequencer 앱을 PC 또는 Mac에 설치하려면 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야합니다. 우리는 당신이 어떻게 사용하는지 이해할 수 있도록 열심히 일했습니다 app 아래의 네 단계를 거쳐 귀하의 컴퓨터에서 사용할 수 있습니다 :
확인. 먼저 첫 번째 것들. 컴퓨터에서 응용 프로그램을 사용하려면 먼저 Mac 저장소 또는 Windows 응용 프로그램 저장소를 방문하여 Bluestacks 응용 프로그램이나 Nox App 을 클릭하십시오. 웹에있는 대부분의 자습서는 Bluestacks 응용 프로그램을 권장하며 컴퓨터에서 Bluestacks 응용 프로그램을 사용하는 데 어려움이있을 경우 쉽게 온라인 솔루션을 쉽게 찾을 수 있기 때문에 Bluestacks 응용 프로그램을 권장합니다. Bluestacks Pc 또는 Mac 소프트웨어 여기 를 다운로드 할 수 있습니다.
설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 StepBud - AUv3 MIDI Sequencer 검색 막대에서 검색을 누릅니다. 클릭 StepBud - AUv3 MIDI Sequencer응용 프로그램 아이콘. 의 창 StepBud - AUv3 MIDI Sequencer Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.
보너스 : 다운로드 StepBud iTunes에서
| 다운로드 | 개발자 | 평점 | 점수 | 현재 버전 | 성인 랭킹 |
|---|---|---|---|---|---|
| ￦5,900 iTunes에서 | Cem Olcay | 0 | 0 | 1.8 | 4+ |
Windows 11에서 모바일 앱을 사용하려면 Amazon Appstore를 설치해야 합니다. 설정이 완료되면 선별된 카탈로그에서 모바일 앱을 검색하고 설치할 수 있습니다. Windows 11에서 Android 앱을 실행하려는 경우 이 가이드가 적합합니다..
StepBud is a MIDI Sequencer with Audio Unit AUv3 plugin, Audiobus and Ableton Link. Add an unlimited number of steps to your sequencer. Your steps appear with a LED and a fader on top of your screen. You can change the active mode that your step faders displaying/controlling. - Set the current note or chord in range of the scale and key you selected with respect the range of the octave you want to focus, - Set the velocity, rate, gate time, modulation, pitch bend, portamento, probability and swing for each step, - Try increasing the rate and repeat count your steps if you want to add more flavor. - Send unlimited custom MIDI CC messages if you want to control your hardware or software synth parameters. - Lock steps if you don't want them to change their value. - Skip steps for creating interesting live performances. Below the step faders, you have a master fader where you can control your entire sequencer. It has two modes which you can change from the settings strip on the bottom of the app. - In copy mode, it assigns its value to each step. - In shift mode, it shifts up or down each step. If you want to go off-scale or try some crazy chords on some of your steps, or maybe on all of them, you can go to the Step Editor by double tapping the LED of the step you want to edit. In StepBud's powerful Step Editor, you can set your step's notes either from the virtual keyboard or your connected MIDI keyboard. Don't forget to enable MIDI in port of your MIDI keyboard or the you want to receive MIDI from the settings menu. You may also preview the selected notes by pressing the preview button in Step Editor for making sure you created the perfect sound for your particular step. You can also toggle the steps you want to disable by tapping its LED. If you long-press the LED, you can access a menu where you may copy/paste the steps around, remove them or edit them. If you enable the lock mode from the settings strip on the bottom of the app, you may adjust each visible step fader on the screen by a single swipe gesture without having to lift your finger up. Try to change your arppegio mode from the settings strip. You can sequence your steps up, down, up-down or random order. StepBud is a MIDI sequencer app and it does not generate sounds itself. You need to route its MIDI out port in the settings menu to the audio app you want to sequence. Please note that you need to have an iOS 11+ device and an Audio Unit host application such as AUM, apeMatrix, Cubasis, BeatMaker or Audiobus in order to use the StepBud as an Audio Unit plugin. And don't forget to route StepBud's MIDI out to the app or audio unit you want to sequence. StepBud's MIDI layer powered by free and open-source project AudioKit https://github.com/AudioKit/AudioKit Also, StepBud offers its core components for free on GitHub. Feel free to star, fork or contribute. https://github.com/cemolcay/MusicTheory https://github.com/cemolcay/LiveFader https://github.com/cemolcay/MIDIEventKit
PcMac 한국어 
