Mobile Oscilloscope PC 용 : 무료 다운로드

★ ★ ★ 에디터의 리뷰

1. The trigger modes are: automatic mode, normal trigger and single trigger; the trigger edges are: rising edge trigger, falling edge trigger, rising or falling edge trigger, jump trigger and differential trigger; the trigger value can be selected.

2. This application turns your phone into a powerful handheld oscilloscope for audio signal analysis (professionals can also use for circuit analysis).

3. The signal parameters can be displayed in detail, including: maximum value, minimum value, average value, effective value and frequency, and the frequency measurement is very accurate.

4. Circuit measurement is risky and the author of this application will not be liable for any loss of personnel or equipment resulting from the correct or incorrect use of this application.

5. Professionals can use this application for circuit measurements and the electrical signal is input via the microphone channel of the headset.

6. This application is normally used for audio signal measurement without any risk.

7. There are multiple trigger modes.

8. With the measurement function, it is freely measured in the horizontal and vertical directions, gesture operation, easy to use.

9. The high voltage circuit must go through the isolator and attenuator.

10. Conventional low-voltage circuits must also add an attenuator and then enter the phone.

11. Please pay attention to safety: You must have enough professional knowledge.

스크린 샷

다운로드 및 설치 방법 Mobile Oscilloscope 귀하의 PC 및 Mac에서

호환되는 PC 앱 또는 대안 확인

앱	다운로드	평점	개발자
	앱 또는 대안 다운로드 ↲	1 1.00	Huaiwei Zhang

또는 아래 가이드를 따라 PC에서 사용하십시오. :

PC 버전 선택:

Windows 10
Windows 11

소프트웨어 설치 요구 사항:

1 단계 : PC 및 Mac 용 Android 에뮬레이터 다운로드

직접 다운로드 가능합니다. 아래 다운로드 :

2 단계 : PC 또는 Mac에 에뮬레이터 설치

3 단계 : Mobile Oscilloscope PC의 경우 - Windows 7/8 / 10 / 11

설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 Mobile Oscilloscope 검색 막대에서 검색을 누릅니다. 클릭 Mobile Oscilloscope응용 프로그램 아이콘. 의 창 Mobile Oscilloscope Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.

PC 용 호환 APK 받기

다운로드	개발자	평점	현재 버전
다운로드 PC 용 APK »	Huaiwei Zhang	1.00	1.2

다운로드 Mac OS의 경우 (Apple)

다운로드	개발자	리뷰	평점
$0.99 Mac OS의 경우	Huaiwei Zhang	1	1.00

기능 및 설명

This application turns your phone into a powerful handheld oscilloscope for audio signal analysis (professionals can also use for circuit analysis). The signal parameters can be displayed in detail, including: maximum value, minimum value, average value, effective value and frequency, and the frequency measurement is very accurate. There are multiple trigger modes. The trigger modes are: automatic mode, normal trigger and single trigger; the trigger edges are: rising edge trigger, falling edge trigger, rising or falling edge trigger, jump trigger and differential trigger; the trigger value can be selected. With the measurement function, it is freely measured in the horizontal and vertical directions, gesture operation, easy to use. Waveforms can be freely zoomed with gestures or buttons. Supports interface color selection. Has a storage depth of 10 seconds. This application is normally used for audio signal measurement without any risk. Circuit measurement special instructions: Professionals can use this application for circuit measurements and the electrical signal is input via the microphone channel of the headset. Please pay attention to safety: You must have enough professional knowledge. The high voltage circuit must go through the isolator and attenuator. Conventional low-voltage circuits must also add an attenuator and then enter the phone. Circuit measurement is risky and the author of this application will not be liable for any loss of personnel or equipment resulting from the correct or incorrect use of this application.

다운로드 PC 용