에 의해 게시 Living Memory Software
1. On top of all that LayR has a MIDI Controller Mixer that can be used during performance to control the synth engine in real time and can also transmit MIDI cc's from LayR's output port to other destinations.
2. Every parameter in the synth engine can be assigned to any MIDI Control Change number and parameters spread across multiple Layers can be grouped and controlled by a single MIDI cc with assignable range and direction.
3. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating massive pads and huge spacy ambient textures with extremely long evolution cycles.
4. LayR's primary sound components are called Performances where a Performance is a set of Instruments and each Instrument is a set of Layers and each Layer is a complete synthesizer.
5. An extensive selection of usable instrument and performance presets are included which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths.
6. Each Layer has a dual oscillator that can morph with modulation between two shapes and phase states, two rich and warm state variable filters, a wave folder and a mixing section to blend oscillators and filters in any serial/parallel combination.
7. LayR is a massively polyphonic, multi-timbral synthesizer for iOS devices, optimized for modern 64 bit CPUs and capable of delivering up to 256 voices of rich, multi-layered and textured sounds.
8. For modulation (frequency, amplitude and phase) there are two Low Frequency Oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started.
9. A performance can consist of any number of instruments each with its own MIDI channel and crossfading keyboard span.
10. Full IAA, Audiobus, Audio Unit and Link compatibility means LayR can be used with all hosts and other music apps on iOS and desktop DAWs.
11. Focused at keyboard players looking for a mobile synth that can be reliably used live on stage LayR is equally at home in the studio.
호환되는 PC 앱 또는 대안 확인
앱 | 다운로드 | 평점 | 개발자 |
---|---|---|---|
![]() |
앱 또는 대안 다운로드 ↲ | 94 4.49
|
Living Memory Software |
또는 아래 가이드를 따라 PC에서 사용하십시오. :
PC 버전 선택:
소프트웨어 설치 요구 사항:
직접 다운로드 가능합니다. 아래 다운로드 :
설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 LayR-Multi Timbral Synthesizer 검색 막대에서 검색을 누릅니다. 클릭 LayR-Multi Timbral Synthesizer응용 프로그램 아이콘. 의 창 LayR-Multi Timbral Synthesizer Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.
다운로드 LayR-Multi Timbral Synthesizer Mac OS의 경우 (Apple)
다운로드 | 개발자 | 리뷰 | 평점 |
---|---|---|---|
$25.99 Mac OS의 경우 | Living Memory Software | 94 | 4.49 |
LayR is a massively polyphonic, multi-timbral synthesizer for iOS devices, optimized for modern 64 bit CPUs and capable of delivering up to 256 voices of rich, multi-layered and textured sounds. LayR's primary sound components are called Performances where a Performance is a set of Instruments and each Instrument is a set of Layers and each Layer is a complete synthesizer. A performance can consist of any number of instruments each with its own MIDI channel and crossfading keyboard span. Each Instrument can consist of any number of Layers to a maximum of 128. Each Layer has a dual oscillator that can morph with modulation between two shapes and phase states, two rich and warm state variable filters, a wave folder and a mixing section to blend oscillators and filters in any serial/parallel combination. For modulation (frequency, amplitude and phase) there are two Low Frequency Oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started. Two loopable ADSR envelopes ranging from fractions of a second to over 100 seconds, an amplitude ADSR and a random number generator with a smoothing filter. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating massive pads and huge spacy ambient textures with extremely long evolution cycles. Focused at keyboard players looking for a mobile synth that can be reliably used live on stage LayR is equally at home in the studio. An extensive selection of usable instrument and performance presets are included which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths. LayR sports almost unparalled and extremely flexible MIDI control. Every parameter in the synth engine can be assigned to any MIDI Control Change number and parameters spread across multiple Layers can be grouped and controlled by a single MIDI cc with assignable range and direction. There is also an 8 track, 16 step Arpeggio Sequencer which can be used to create all sorts of exciting polyrhythmic looped patterns or even ambient generative music. Each track can have it's own speed, playback mode and length. On top of all that LayR has a MIDI Controller Mixer that can be used during performance to control the synth engine in real time and can also transmit MIDI cc's from LayR's output port to other destinations. Full IAA, Audiobus, Audio Unit and Link compatibility means LayR can be used with all hosts and other music apps on iOS and desktop DAWs.
Ostinator-looper,sampler
LayR-Multi Timbral Synthesizer
Auditor - Audio Editor
WaveFolder - Audio Unit
YouTube Music
멜론(Melon)
지니뮤직 - genie
FLO - 플로
Spotify - 노래 듣기 및 장르별 음악 감상
SoundCloud - 음악과 오디오
Shazam: 음악 검색
NAVER VIBE (바이브)
GuitarTuna: 기타 조율 튜너
핀플리 (Pinply)
스마트 칼림바
GarageBand
아이폰 벨소리 - 벨소리 제작 - RingTune
키림바(Keylimba)
벅스 - Bugs