에 의해 게시 yoshihito sakagami
1. If you want to get the current atmospheric pressure, the current dry-bulb temperature(Td) and the current wet-bulb temperature(Tw), tap the "Weather" information button.
2. Furthermore, the app calculates the air condition from dry-bulb temperature(Td) and wet-bulb temperature(Tw) obtained by Assmann-Psychrometer, etc., and the app can also input atmospheric pressure.
3. For natural wet-bulb temperature(Tnw), convert the Wet-bulb temperature(Tw) obtained by measurement by the Assmann Psychrometer to the Wet-bulb temperature(Tw) measured in natural state, a use it as Natural wet-bulb temperature(Tnw).
4. Even if you enter the measurement value such as a non-draft type psychrometer(for example, "Augusto Psychrometer", etc.), just tap the button and the corresponding value can be displayed (※ the app is subject to use of a ventilation type psychrometer in terms of measurement accuracy).
5. The app can calculate 11 items and 13 indicators, and conversion to the Celsius temperature and SI units (or in the Fahrenheit temperature and Imperial and US customary measurement systems) also you can simply by switching of "Temperature Unit".
6. The calculation formula of the outdoor WBGT is "WBGT = 0.7 Tnw + 0.1 Td + 0.2 Tg", but since there is no entry a item Globe thermometer temperature(Tg) in the app, so estimation the Globe thermometer temperature(Tg) by Dry-bulb temperature(Td).
7. You can choose conditions of the wet bulb is you can choose any one of the “Normal" or “Froze” (※ If you choose the “Froze”, setting is enabled in when if sub-zero in wet-bulb temperature(Tw) ).
8. Input range is the temperature is -30 ℃ to 50 ℃ (-22 ° F to 122 ° F), the atmospheric pressure is 600 hPa to 2475 hPa(17.72 inHg to 73.09 inHg).
9. If you use this app, you can easily obtain "Temperature-humidity index(Discomfort Index)", "WBGT(Heat stroke index)", "Dew point temperature", etc., from weather information.
10. The app can receive the calculated value of dry bulb temperature (Td) and wet bulb temperature (Tw) from the sister app “Calculator of Air”.
11. Please input and use the temperature range(0 ℃ to 40 ℃ / 32°F to 104°F ) according to common sense as much as possible.
또는 아래 가이드를 따라 PC에서 사용하십시오. :
PC 버전 선택:
설치하고 사용하고 싶다면 HumidCalc 앱을 PC 또는 Mac에 설치하려면 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야합니다. 우리는 당신이 어떻게 사용하는지 이해할 수 있도록 열심히 일했습니다 app 아래의 네 단계를 거쳐 귀하의 컴퓨터에서 사용할 수 있습니다 :
확인. 먼저 첫 번째 것들. 컴퓨터에서 응용 프로그램을 사용하려면 먼저 Mac 저장소 또는 Windows 응용 프로그램 저장소를 방문하여 Bluestacks 응용 프로그램이나 Nox App 을 클릭하십시오. 웹에있는 대부분의 자습서는 Bluestacks 응용 프로그램을 권장하며 컴퓨터에서 Bluestacks 응용 프로그램을 사용하는 데 어려움이있을 경우 쉽게 온라인 솔루션을 쉽게 찾을 수 있기 때문에 Bluestacks 응용 프로그램을 권장합니다. Bluestacks Pc 또는 Mac 소프트웨어 여기 를 다운로드 할 수 있습니다.
설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 HumidCalc 검색 막대에서 검색을 누릅니다. 클릭 HumidCalc응용 프로그램 아이콘. 의 창 HumidCalc Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.
보너스 : 다운로드 HumidCalc iTunes에서
| 다운로드 | 개발자 | 평점 | 점수 | 현재 버전 | 성인 랭킹 |
|---|---|---|---|---|---|
| 무료 iTunes에서 | yoshihito sakagami | 0 | 0 | 1.1.7 | 4+ |
Windows 11에서 모바일 앱을 사용하려면 Amazon Appstore를 설치해야 합니다. 설정이 완료되면 선별된 카탈로그에서 모바일 앱을 검색하고 설치할 수 있습니다. Windows 11에서 Android 앱을 실행하려는 경우 이 가이드가 적합합니다..
If you use this app, you can easily obtain "Temperature-humidity index(Discomfort Index)", "WBGT(Heat stroke index)", "Dew point temperature", etc., from weather information. Furthermore, the app calculates the air condition from dry-bulb temperature(Td) and wet-bulb temperature(Tw) obtained by Assmann-Psychrometer, etc., and the app can also input atmospheric pressure. The app can calculate 11 items and 13 indicators, and conversion to the Celsius temperature and SI units (or in the Fahrenheit temperature and Imperial and US customary measurement systems) also you can simply by switching of "Temperature Unit". The items and indicators that this app can calculate are as follows. - Dew Point Temperature - Relative Humidity - Humidity Ratio(Absolute Humidity) Weight absolute humidity Weight absolute humidity in the more smaller unit. Volume absolute humidity - Humidity Deficit - Enthalpy - Specific Volume - Equilibrium Vapor Pressure - Partial Pressure - Boiling Point of Water - WBGT(Estimated value) - Discomfort Index[Temperature-humidity index] (( Supplementary explanation about the WBGT(Estimated value) and the Discomfort index. The calculation formula of the outdoor WBGT is "WBGT = 0.7 Tnw + 0.1 Td + 0.2 Tg", but since there is no entry a item Globe thermometer temperature(Tg) in the app, so estimation the Globe thermometer temperature(Tg) by Dry-bulb temperature(Td). - Calculation formula : "Tg = 1.45 Td - 27.162 [Temperature unit: ℉]” There is a very strong correlation between Globe thermometer temperature(Tg) and Dry-bulb temperature(Td). [Statistical information on this correlation : The number of samples is 17376 and the coefficient of determination(R^2) when statistics are taken is 0.919] For natural wet-bulb temperature(Tnw), convert the Wet-bulb temperature(Tw) obtained by measurement by the Assmann Psychrometer to the Wet-bulb temperature(Tw) measured in natural state, a use it as Natural wet-bulb temperature(Tnw). The natural state here means that the wind speed at the time of measurement is 5 meters per second(16.4 feet per second) or less. The algorithm of this conversion is very special, so we omit the explanation. "Discomfort Index" is "Temperature-humidity index". The calculation formula is "Discomfort Index[DI] = 0.4 × (Td + Tw) +15 [Temperature unit: ℉]". )) If you want to get the current atmospheric pressure, the current dry-bulb temperature(Td) and the current wet-bulb temperature(Tw), tap the "Weather" information button. By the way, In iPhone6, etc., you can get the atmospheric pressure by pressing "MEAS" button. You can choose conditions of the wet bulb is you can choose any one of the “Normal" or “Froze” (※ If you choose the “Froze”, setting is enabled in when if sub-zero in wet-bulb temperature(Tw) ). Even if you enter the measurement value such as a non-draft type psychrometer(for example, "Augusto Psychrometer", etc.), just tap the button and the corresponding value can be displayed (※ the app is subject to use of a ventilation type psychrometer in terms of measurement accuracy). The app can receive the calculated value of dry bulb temperature (Td) and wet bulb temperature (Tw) from the sister app “Calculator of Air”. If you use this function, you can input "dew point temperature", "relative humidity", etc. (※ there is a need to start up the "Calculator of Air" first). Input range is the temperature is -30 ℃ to 50 ℃ (-22 ° F to 122 ° F), the atmospheric pressure is 600 hPa to 2475 hPa(17.72 inHg to 73.09 inHg). This app is using the OpenWeatherMap(CC BY-SA4.0). - Disclaimer 1. Please input and use the temperature range(0 ℃ to 40 ℃ / 32°F to 104°F ) according to common sense as much as possible. If you enter an extreme value correct calculation result may not appear. - Disclaimer 2. We are not liable for any damage caused by the use of this application does not bear all of the responsibility.
미세미세 - 미세먼지, 초미세먼지, 날씨
날씨날씨 - 날씨, 미세먼지
AccuWeather 날씨를 확인하는 가장 확실한 방법
CARROT Weather
Windy.com
첫화면 날씨-위젯, 미세먼지, 날씨
Dusts - 미세먼지, 초미세먼지, 통합대기
미세먼지 코리아
YoWindow 날씨
지능형 온도계
에어코리아 ( 구 우리동네대기정보 )
물때와날씨-조석예보, 바다날씨의 똑똑한 해석
하루날씨 - 미세먼지,날씨,기상청
IQAir AirVisual | 에어비주얼 | 대기질
원기날씨 - 미세먼지, 기상청, 날씨
PcMac 한국어 
