에 의해 게시 에 의해 게시 Andrew Smith
1. Each traffic light can be linked to a color light bulb using HomeKit, to provide visible notification of sound levels.
2. Place a color light bulb near the sound mixer, stage, or even the manager's office, so that everyone can see if the sound levels exceed your preset trigger levels.
3. For example, set one traffic light to average SPL over 10 minutes, and set the other to monitor peak levels.
4. Monitor sound levels for events, public spaces, and concerts.
5. Set the SPL weighting to flat (Z), A, C, or one of the low frequency octave bands, 32Hz, 63Hz, 125Hz, or 32Hz+63Hz.
6. Two independent sound monitors allow you to configure this app to any local requirements.
7. Set the SPL decay (speed and type of averaging) to Fast, Slow, or any Leq value from 1 second to 8 hours.
8. Includes email notifications for sending emails when either or both meters is triggered into the red level.
9. Set one to A weighting, and the other to C weighting, or flat.
10. The Leq can be done one time period at a time, or it can be a running Leq of the last time period.
11. You can also upgrade to our iPrecisionMic or iTestMic to get Class 1 or Class 2 results.
또는 아래 가이드를 따라 PC에서 사용하십시오. :
PC 버전 선택:
소프트웨어 설치 요구 사항:
직접 다운로드 가능합니다. 아래 다운로드 :
설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 Dual SPL Traffic Light 검색 막대에서 검색을 누릅니다. 클릭 Dual SPL Traffic Light응용 프로그램 아이콘. 의 창 Dual SPL Traffic Light Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.
다운로드 Dual SPL Traffic Light Mac OS의 경우 (Apple)
| 다운로드 | 개발자 | 리뷰 | 평점 |
|---|---|---|---|
| $19.99 Mac OS의 경우 | Andrew Smith | 0 | 1 |
Dual SPL Traffic Light Monitor sound levels for events, public spaces, and concerts. Two independent sound monitors allow you to configure this app to any local requirements. For example, set one traffic light to average SPL over 10 minutes, and set the other to monitor peak levels. Set one to A weighting, and the other to C weighting, or flat. This app works fine with the internal iOS device mic. You can also upgrade to our iPrecisionMic or iTestMic to get Class 1 or Class 2 results. Each traffic light can be linked to a color light bulb using HomeKit, to provide visible notification of sound levels. Place a color light bulb near the sound mixer, stage, or even the manager's office, so that everyone can see if the sound levels exceed your preset trigger levels. Set the SPL decay (speed and type of averaging) to Fast, Slow, or any Leq value from 1 second to 8 hours. The Leq can be done one time period at a time, or it can be a running Leq of the last time period. Set the SPL weighting to flat (Z), A, C, or one of the low frequency octave bands, 32Hz, 63Hz, 125Hz, or 32Hz+63Hz. Includes email notifications for sending emails when either or both meters is triggered into the red level.
PcMac 한국어 
