다운로드 MixRemote PC 용

PC를 설정하고 Windows 11에서 MixRemote 앱을 다운로드하는 단계:

1. 컴퓨터가 호환되는지 확인: 최소 요구 사항은 다음과 같습니다.
• RAM: 8GB (최저한의), 16GB (추천)
• 저장: SSD
• Processor:
• Intel Core i3 8th Gen (최소 이상)
• AMD Ryzen 3000 (최소 이상)
• Qualcomm Snapdragon 8c (최소 이상)
• Processor Architecture: x64 or ARM64
2. MixRemote 에 이미 기본 Windows 버전이 있는지 확인하십시오. 여기서 하세요 ». 기본 버전이 없으면 3단계로 진행합니다.

The MixRemote app for iPad allows full remote control of the M series of digital audio mixers, through their internal WiFi Access Point. The M series digital mixers are compact, self-contained, feature-packed faderless units which are ideal in all cases where live music is being performed. Several internal digital effects, both in send and in insert, are available for maximum flexibility. Several iPads can connect to the internal WiFi Access Point and manage all the available parameters. No audio is transferred between the iPad and the digital mixer, and all features of the digital mixers are accessible with this app, without requiring an additional computer for specific settings. Features: - Intuitive user interface and consistent layout - Complete recall of all parameters (SHOW) - Song-oriented recall of a parameter subset (SNAPSHOT) - Several multi-effects on specific inputs, whose parameters can be saved and recalled as a PATCH - MFX1 and MFX2: 3 effects in series (modulation, delay, special FX) - MFX3 and MFX4: 5 effects in series (overdrive, modulation, delay, special FX, amp simulation) - Other 3 effects with dedicated send (post-fader) busses - on all physical inputs: a versatile Noise Gate, a flexible and musical Compressor with two available modes: Easy (one-knob) and Advanced - 4-band Parametric EQ on each input, with three selectable modes: Standard, Vintage and Mmooth - 4-band Parametric EQ (in standard mode) on AUX and PHONES outputs - Presets are available for Noise Gate, Compressor, EQ, Reverb, and other effects on send busses - 31-band Stereo Graphic EQ on MAIN left and right outputs, with presets - Microphone Preamps with digital remote control, switchable 48V phantom power and phase invert - Line inputs with selectable -10 dBV / +4 dBu sensitivity; two line inputs can be switched into Hi-Z impedance mode - Two simultaneous amp simulations of guitar and bass amplifiers, licensed from OverloudTM - Modeling of MarkBassTM TTE-500 and Little Mark III amplifiers - All inputs can be linked into stereo pairs - Dual footswitch with assignable functions: individual FX on/off on MFX1, MFX2, MFX3 and MFX4, previous and next MFX1/MFX2/MFX3/MFX4 PATCH, previous and next SNAPSHOT, player control - Flexible stereo file player, with selectable Auto mode that enables automatic playback of next file - Supported file types on the player : WAV16, WAV24, AIFF, MP3 - The player also allows 4-track mode, using multitrack WAV files - Internal Metronome with flexible time signature and accent/beat sample selection - Internal stereo RECORDER on USB flash drive, with dedicated trim and VU meter - MIDI control of several parameters - 5-pin MIDI and USB-MIDI support (automatically merged) - Selectable internal/external WiFi second antenna; the first antenna is internal (M18 only) - Separate buss can be selected for PFL solo or Personal Monitoring (independent stereo mix of all inputs) - Four DAC groups (with Mute) that can be enabled on any of the available inputs - Quick Bar to allow immediate access to player control and several mutes - Mastering Processor on MAIN left and right outputs, including Valve Warmer, Xciter and Maximizer processors; the three units can be configured from a single preset for maximum ease of parameter recall - Several iPads can be connected at once (up to 5) to enable simultaneous control from different performers - A LAN port is available for connecting an external WiFi client or Access Point RCF spa Web SiteMixRemote Support