ZephyrPro Wind Meter PC 용

다운로드 ZephyrPro Wind Meter PC 용

에 의해 게시 에 의해 게시 Daniel Campagnola

  • 출시일: 2020-05-13
  • 카테고리: Weather
  • 다운로드: $1.99
  • 현재 버전: 4.0
  • 파일 크기: 6.64 MB
  • 호환성: Windows 11/Windows 10/8/7/Vista

다운로드 ⇩
평점:

3.0/5
3
보낸 사람 2 평점

★ ★ ★ 에디터의 리뷰

1. Settable wind smoothing factor, useful to stabilize measures/graphs with variable winds in Dynamic mode.

2. 8) HINT: for long observation periods (> 1s) read the AVG value, for medium observation periods (1s) use the Average mode, for short observation periods (gusts) use the Dynamic mode.

3. This application brings the functionalities of an Anemometer (Wind Speed Meter) and of a Wind Spectrum Analyzer to your iphone (ipad/ipod).

4. Dynamic and Average wind speed measuring modes with real time charts.

5. Settable average period, useful to stabilize measures/graphs in Average mode.

6. No sensors required: realtime wind speed reading just using your iphone microphone.

7. Settable cutoff frequency of the wind band, in order to avoid some specific interference.

8. This application is not meant to be used in place of scientific instrumentation, but with a good calibration it can come close to a real anemometer device.

9. The application relies on the mobile microphone signal.



스크린 샷

       


다운로드 및 설치 방법 ZephyrPro Wind Meter 귀하의 PC 및 Mac에서


호환되는 PC 앱 또는 대안 확인


다운로드 평점 개발자
ZephyrPro Wind Meter 앱 또는 대안 다운로드 ↲ 2
3.00
Daniel Campagnola

또는 아래 가이드를 따라 PC에서 사용하십시오. :



PC 버전 선택:

  1. Windows 10
  2. Windows 11

소프트웨어 설치 요구 사항:

1 단계 : PC 및 Mac 용 Android 에뮬레이터 다운로드

직접 다운로드 가능합니다. 아래 다운로드 :

  1. Nox »
  2. Bluestacks »

2 단계 : PC 또는 Mac에 에뮬레이터 설치


3 단계 : ZephyrPro Wind Meter PC의 경우 - Windows 7/8 / 10 / 11

설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 ZephyrPro Wind Meter 검색 막대에서 검색을 누릅니다. 클릭 ZephyrPro Wind Meter응용 프로그램 아이콘. 의 창 ZephyrPro Wind Meter Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.


PC 용 호환 APK 받기


다운로드 개발자 평점 현재 버전
다운로드 PC 용 APK » Daniel Campagnola 3.00 4.0


다운로드 ZephyrPro Wind Meter Mac OS의 경우 (Apple)

다운로드 개발자 리뷰 평점
$1.99 Mac OS의 경우 Daniel Campagnola 2 3.00

기능 및 설명

This application brings the functionalities of an Anemometer (Wind Speed Meter) and of a Wind Spectrum Analyzer to your iphone (ipad/ipod). No sensors required: realtime wind speed reading just using your iphone microphone. The typical wind range is 1-16 m/s (with a small trick, up to 30 m/s: see the user guide): the full scale is limited by the internal mic maximum SPL Unique features & advanced calibration: simply the best! >>ZephyrPro at a glance Dynamic and Average wind speed measuring modes with real time charts. Wind direction detection Settable measuring units: m/s, km/h, mph, knots, Beaufort Settable wind smoothing factor, useful to stabilize measures/graphs with variable winds in Dynamic mode. Settable average period, useful to stabilize measures/graphs in Average mode. Wind Spectrum Analyzer with real time chart. Settable cutoff frequency of the wind band, in order to avoid some specific interference. Panel & Chart data exporting Advanced calibration. Embedded user guide. >>Quick start The application relies on the mobile microphone signal. To achieve the best results consider the following: 1) Easy calibration (only the first time): click on the calibration button (for details read the user guide accessible from the calibration page) 2) avoid measurement in presence of loud noises (heavy traffic, motorbikes, trucks, loud talking, shots) 3) keep your fingers away from the microphone and keep it in a vertical position 4) orient the front of the iphone in the direction of the wind without interfering with your body 5) click on one of the function buttons (Dynamic, Average, Spectrum) 6) A click on the PLAY button starts the measurement 7) A click on the RESET button clears the current measurement 8) HINT: for long observation periods (> 1s) read the AVG value, for medium observation periods (1s) use the Average mode, for short observation periods (gusts) use the Dynamic mode. This application is not meant to be used in place of scientific instrumentation, but with a good calibration it can come close to a real anemometer device. Read the embedded User Guide (reachable from any setting button): for any info or troubleshooting you can contact us at support@gaiacons.com.



추가 응용 프로그램 Daniel Campagnola





최고의 앱 - Weather