에 의해 게시 iMusicAlbum
1. Discover new ways to create and construct unusual and exciting sounds from any environmental audio recordings or samples recorded from other apps through Inter-App audio or Audiobus.
2. The first part is the field recorder with special options for different ways of record environmental sound from microphone or record other sound sources.
3. Advanced field recorder combined with a sound warp engine and a collection of ready to use dynamic presets for iPad and iPhone.
4. You can record sounds and noises, delete unwanted parts and then use presets to give a whole new sounding or create spectacular soundscapes and textures to use them as loops in this app.
5. And even use FieldScaper as effect in real time with other apps or external input.
6. You can change the parameters of oscillators, filters, delays and mixer by using any external MIDI controller or MIDI apps like sequencers.
7. The second part is the scaper sound engine that with using dynamic presets can easily transform the most ordinary sounds into something absolutely different.
8. - Complete MIDI control for all faders, knobs and other modes.
9. The FieldScaper supports complete MIDI control for all faders, knobs and many buttons.
10. - Loop based mode for processing input in real time as effect.
11. - Distortion effect based on breaking addressing of samples (like on circuit bending).
또는 아래 가이드를 따라 PC에서 사용하십시오. :
PC 버전 선택:
설치하고 사용하고 싶다면 FieldScaper 앱을 PC 또는 Mac에 설치하려면 컴퓨터 용 데스크톱 응용 프로그램 에뮬레이터를 다운로드하여 설치해야합니다. 우리는 당신이 어떻게 사용하는지 이해할 수 있도록 열심히 일했습니다 app 아래의 네 단계를 거쳐 귀하의 컴퓨터에서 사용할 수 있습니다 :
확인. 먼저 첫 번째 것들. 컴퓨터에서 응용 프로그램을 사용하려면 먼저 Mac 저장소 또는 Windows 응용 프로그램 저장소를 방문하여 Bluestacks 응용 프로그램이나 Nox App 을 클릭하십시오. 웹에있는 대부분의 자습서는 Bluestacks 응용 프로그램을 권장하며 컴퓨터에서 Bluestacks 응용 프로그램을 사용하는 데 어려움이있을 경우 쉽게 온라인 솔루션을 쉽게 찾을 수 있기 때문에 Bluestacks 응용 프로그램을 권장합니다. Bluestacks Pc 또는 Mac 소프트웨어 여기 를 다운로드 할 수 있습니다.
설치 한 에뮬레이터 애플리케이션을 열고 검색 창을 찾으십시오. 일단 찾았 으면 FieldScaper 검색 막대에서 검색을 누릅니다. 클릭 FieldScaper응용 프로그램 아이콘. 의 창 FieldScaper Play 스토어 또는 앱 스토어의 스토어가 열리면 에뮬레이터 애플리케이션에 스토어가 표시됩니다. Install 버튼을 누르면 iPhone 또는 Android 기기 에서처럼 애플리케이션이 다운로드되기 시작합니다. 이제 우리는 모두 끝났습니다.
"모든 앱 "아이콘이 표시됩니다.
클릭하면 설치된 모든 응용 프로그램이 포함 된 페이지로 이동합니다.
당신은 아이콘을 클릭하십시오. 그것을 클릭하고 응용 프로그램 사용을 시작하십시오.
보너스 : 다운로드 FieldScaper iTunes에서
| 다운로드 | 개발자 | 평점 | 점수 | 현재 버전 | 성인 랭킹 |
|---|---|---|---|---|---|
| ￦12,000 iTunes에서 | iMusicAlbum | 1 | 2 | 2.2 | 4+ |
Windows 11에서 모바일 앱을 사용하려면 Amazon Appstore를 설치해야 합니다. 설정이 완료되면 선별된 카탈로그에서 모바일 앱을 검색하고 설치할 수 있습니다. Windows 11에서 Android 앱을 실행하려는 경우 이 가이드가 적합합니다..
Advanced field recorder combined with a sound warp engine and a collection of ready to use dynamic presets for iPad and iPhone. Discover new ways to create and construct unusual and exciting sounds from any environmental audio recordings or samples recorded from other apps through Inter-App audio or Audiobus. The main advantage is that you can record and modify samples along the way within the single app. You can record sounds and noises, delete unwanted parts and then use presets to give a whole new sounding or create spectacular soundscapes and textures to use them as loops in this app. And even use FieldScaper as effect in real time with other apps or external input. The FieldScaper consists of two main parts. The first part is the field recorder with special options for different ways of record environmental sound from microphone or record other sound sources. With the sample editor you can cut or split the source sample for more convenient use. The second part is the scaper sound engine that with using dynamic presets can easily transform the most ordinary sounds into something absolutely different. These parts connect with each other into one whole but you can use recorder or scaper independently. The FieldScaper supports complete MIDI control for all faders, knobs and many buttons. You can change the parameters of oscillators, filters, delays and mixer by using any external MIDI controller or MIDI apps like sequencers. With the MIDI controllers this app becomes very comfortable to use at live performance. Field recorder: - Auto start record when input signal appears. - Auto stop record when signal below threshold or by time. - Record series of samples by a signal presence. - Recorder timer in seconds or measure (sync with BPM). - Input signal monitor with different modes. - Automatic gain control, cut off input filters and noise gate. - Advanced sample editor (delete, trim, split, cut, copy, paste, undo). - Filter and normalizer for recorded sample. Scaper sound engine: - Loop based mode for processing input in real time as effect. - Three sample-based oscillators, each with set of effects. - Low-pass, high-pass, band-pass, band-stop filters with resonance. - Two range delay with smooth time change and additional modes. - Advanced spatial mixer / reverb with changing of side and distance. - Three-band parametric equalizer for each oscillator. - Wide range changing of oscillator speed with option of reverse. - Distortion effect based on breaking addressing of samples (like on circuit bending). - Complex effect contains lofi, overload, noise, ringmod, flanger, phaser. - Step sequencer can control selected parameter and envelope generator (ADSR). - Individual or group of LFO for each effect with additional modes and BPM sync. - The "Main effect" function for control several parameters simultaneously. Additional features: - More 50 predefined presets with wide range of effects. - Scenes for storing and loading all operation parameters. - Pack the scene and all its samples and presets to single file. - Convenient file manager with groups of files by name or date. - Access samples and records via standard iOS app "Files". - Complete MIDI control for all faders, knobs and other modes. - Adaptive UI for portrait and landscape orientation. - Different color schemes available for UI. - Detailed application description (built-in and PDF file). - Inter-App audio compatible (with transport and BPM controls). - Supports Audiobus 3 with "State Saving" and MIDI features. - Supports Ableton Link with start / stop sync. Requirements: Third generation of iPad or fifth generation of iPhone and higher is required. You can find more details about FieldScaper on the website: https://motion-soundscape.blogspot.com Overview and demo: https://youtu.be/n9nQRN6xWGo https://youtu.be/cCr5UPkdMY0 https://youtu.be/Kp88NkJpy2M
PcMac 한국어 
