投稿者 投稿者 Jian Li
1. By using narrow zones of 6° of longitude (up to 800 km) in width, and reducing the scale factor along the central meridian to 0.9996 (a reduction of 1:2500), the amount of distortion is held below 1 part in 1,000 inside each zone.
2. In each zone the scale factor of the central meridian reduces the diameter of the transverse cylinder to produce a secant projection with two standard lines, or lines of true scale, about 180 km on each side of, and about parallel to, the central meridian (Arc cos 0.9996 = 1.62° at the Equator).
3. Prior to the development of the Universal Transverse Mercator coordinate system, several European nations demonstrated the utility of grid-based conformal maps by mapping their territory during the interwar period.
4. In the post-war years, these concepts were extended into the Universal Transverse Mercator / Universal Polar Stereographic (UTM/UPS) coordinate system, which is a global (or universal) system of grid-based maps.
5. The Universal Transverse Mercator coordinate system was developed by the United States Army Corps of Engineers in the 1940s.
6. Calculating the distance between two points on these maps could be performed more easily in the field (using the Pythagorean theorem) than was possible using the trigonometric formulas required under the graticule-based system of latitude and longitude.
7. The WGS84 ellipsoid is now generally used to model the Earth in the UTM coordinate system, which means current UTM northing at a given point can be 200+ meters different from the old.
8. The UTM system divides the Earth between 80°S and 84°N latitude into 60 zones, each 6° of longitude in width.
9. Each of the 60 zones uses a transverse Mercator projection that can map a region of large north-south extent with low distortion.
10. Zone 1 covers longitude 180° to 174° W; zone numbering increases eastward to zone 60, which covers longitude 174° to 180° E.
11. Distortion of scale increases to 1.0010 at the zone boundaries along the equator.
または、以下のガイドに従ってPCで使用します :
PCのバージョンを選択してください:
ソフトウェアのインストール要件:
直接ダウンロードできます。以下からダウンロード:
これで、インストールしたエミュレータアプリケーションを開き、検索バーを探します。 一度それを見つけたら、 Mercator Projector - direct & inverse solution of UTM Projection を検索バーに入力し、[検索]を押します。 クリック Mercator Projector - direct & inverse solution of UTM Projectionアプリケーションアイコン。 のウィンドウ。 Mercator Projector - direct & inverse solution of UTM Projection - Playストアまたはアプリストアのエミュレータアプリケーションにストアが表示されます。 Installボタンを押して、iPhoneまたはAndroidデバイスのように、アプリケーションのダウンロードが開始されます。 今私達はすべて終わった。
「すべてのアプリ」というアイコンが表示されます。
をクリックすると、インストールされているすべてのアプリケーションを含むページが表示されます。
あなたは アイコン。 それをクリックし、アプリケーションの使用を開始します。
ダウンロード Mercator Projector Mac OSの場合 (Apple)
ダウンロード | 開発者 | レビュー | 評価 |
---|---|---|---|
$0.99 Mac OSの場合 | Jian Li | 0 | 1 |
LocRec - Record Location with Photos by Route
Antipodes - the furthest distance in the earth
Magnetometor
Gaussmeter - Teslameter
Angle Conv
Google アプリ
Google Chrome - ウェブブラウザ
au Wi-Fiアクセス
かんたんnetprint-PDFも写真もコンビニですぐ印刷
セブン-イレブン マルチコピー
dアカウント設定/dアカウント認証をよりかんたんに
My SoftBank
Simeji - 日本語文字入力 きせかえキーボード
マイナポータル
PrintSmash
セブン−イレブン マルチコピー Wi-Fiアプリ
My docomo - 料金・通信量の確認
My au(マイエーユー)-料金・ギガ残量の確認アプリ
my 楽天モバイル
UQ mobile ポータル