写的 - SKJM, LLC
1. If you do not have a Windows computer at your disposal to run the camera manufacturer's configuration application then the simplest alternative solution is to use IP Cam Config to configure the camera to connect to your local network.
2. To configure a new network IP camera using IP Cam Config simply follow the installation instructions included with the camera, substituting IP Cam Config for the manufacturer's configuration application.
3. Once you have connected the camera to your local network router via an Ethernet network cable, power up the camera and wait approximately 30 seconds for the camera to start up before launching the IP Cam Config application.
4. IP Cam Config lets you use your Mac to connect supported "Windows Only" Ethernet and WiFi network IP cameras to your local network.
5. When you first launch IP Cam Config, the application will scan your local network to find any compatible network IP cameras.
6. What most users don't know is that you can still connect to and view these cameras from a non-Windows device once they have been configured to connect to your local network.
7. One of the ways to get the most out of our popular iCam mobile app is to set up a number of WiFi network IP cameras around your house so that you are not just limited to monitoring the room occupied by the computer.
8. Once the configuration has been changed your camera should restart and you should be able to connect to it using its newly assigned IP address within about 30 seconds or so.
9. Cameras from other manufacturers (such as TrendNET and DIGITUS, for example) seem to share the same internals as the AirLink101 cameras that we tested, so they should also be configurable with IP Cam Config.
10. As more specific camera manufacturers and models are confirmed to be working with IP Cam Config we will also be adding those to the list.
11. Once the app has finished searching, select which camera you would like to configure, and assign it either a Static IP address or let your router assign the camera one automatically via DHCP.
或按照以下指南在PC上使用 :
选择你的电脑版本:
软件安装要求:
可直接下载。下载如下：
现在，打开已安装的模拟器应用程序并查找其搜索栏。一旦找到它，请键入 IP Cam Config 在搜索栏并按搜索。点击 IP Cam Config应用程序图标。一个 窗口 IP Cam Config 在Play商店或应用程序商店将打开并且它将在您的模拟器应用程序中显示商店。现在，按下安装按钮并像在iPhone或Android设备上一样，您的应用程序将开始下载。现在我们都完成了。
你会看到一个名为“所有应用程序”的图标。
点击它，它会带你到一个包含所有已安装应用程序的页面。
你应该看到 图标。点击它并开始使用该应用程序。
下载 IP Cam Config 对于Mac OS (Apple)
| 下载 | 开发人员 | 评论 | 评分 |
|---|---|---|---|
| $0.99 对于Mac OS | SKJM, LLC | 0 | 1 |
PcMac China 
