下载 digiMIX Utility 为 PC

1. The four preset file types and computer filename extensions for each are Scene (*.sScen), DSP Channel (*.sDSP), DFX (*.sDFX), and GEQ (*.sGEQ). Use the drop-down boxes beneath DSP Channel and GEQ preset type buttons to target a mixer channel when loading a DSP or GEQ computer preset file.

2. The preset manager saves mixer preset settings from the mixer to a user-named computer file, or loads preset settings from a computer file back to the mixer.

3. Connect the digiMIX mixer to your computer or local network using the mixer's Ethernet Control jack, or connect directly to the computer using the *USB Control jack.

4. 4) Alternately, if the app is already open and connected, you must reset the connection to the mixer by pressing the app Disconnect button, then press the Connect button when it appears again.

5. 5) Once connected or re-connected, press the app Update Firmware button to enter the firmware program screen.

6. "digiMIX Utility" app is both a preset manager and a firmware update utility for use with Ashly digiMIX digital mixers.

7. The mixer's current firmware revision is displayed in the System screen.

8. Communication with the mixer is confirmed when an IP address (Ethernet) or Device Port number (USB) is shown in the app start-up screen.

9. Firmware is the embedded control program that runs everything within the mixer.

10. 2) Power-up the mixer while holding down the System button until several lines of program text appear on the mixer touchscreen.

11. To delete a preset from the mixer, select the preset to delete and use the app's Delete Preset function.